Sony HCD-HDX267W Operating Instructions - Page 12
Connecting the TV, 3 Connecting the Antenna (Aerial), Set up the AM loop antenna aerial.
View all Sony HCD-HDX267W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Getting Started - BASIC - 2 Connecting the TV Required cords A Video cord . B Audio cord (not supplied) Yellow White (L/audio) Red (R/audio) Tip • When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the "Dolby Pro Logic," "Dolby Pro Logic II MOVIE," or "Dolby Pro Logic II MUSIC" sound field (page 30). 3 Connecting the Antenna (Aerial) To connect the AM loop antenna (aerial) The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle or roll up the antenna (aerial). 1 Remove only the loop part from the plastic stand. 2 Set up the AM loop antenna (aerial). 3 Connect the cords to the AM antenna (aerial) terminals. Cord (A) or cord (B) can be connected to either terminal. A Insert the cord pushing down the terminal clamp. B Insert until this part. Note • Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result. Tip • Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound. 4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly. 12GB