Sony HCD-HDX267W Operating Instructions - Page 77
Adjusting the speaker level by using the test tone, LEVEL SURROUND]
View all Sony HCD-HDX267W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
0.0 - 7.0 m2)/ 0 - 23 ft Be sure to change the value in the Setup Display when you move the speakers. [L/R] Surround speakers distance 3.0 m/10 ft1) can be moved up to 5.0 meters (appears when you (16 ft) closer to the listening set [SURROUND] to position from the front speaker [YES] in the distance. [CONNECTION] setting.) 1)When you perform the Quick Setup (page 15), the default settings are changed. 2)0.0 to 6.9 meters for North American models. Note • If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. • Depending on the input stream, the [DISTANCE] setting may not be effective. x [LEVEL (FRONT)] You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] 0.0 dB Set this between -6.0 dB and 0.0 dB. [CENTER] 0.0 dB (appears when you set [CENTER] to [YES] in the [CONNECTION] setting.) Set this between -6.0 dB and +6.0 dB. [SUBWOOFER] +2.0 dB Set this between -6.0 dB and +6.0 dB. x [LEVEL (SURROUND)] You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. [L/R] Set this between -6.0 dB and 0.0 dB +6.0 dB. (appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.) To adjust the volume of all the speakers at one time Turn the VOLUME control on the unit, or press VOLUME +/- on the remote. x [TEST TONE] The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)]. [OFF] [ON] The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence. Advanced Settings and Adjustments Adjusting the speaker level by using the test tone 1 Press DISPLAY when the system is in stop mode. The Control Menu display appears. 2 Press X/x to select [SETUP], then press . The options for [SETUP] appear. 3 Press X/x to select [CUSTOM], then press . The Setup Display appears. 4 Press X/x repeatedly to select [SPEAKER SETUP], then press or c. continued 77GB