Sony HMZ-T3 Reference Guide - Page 17

Using the Stand 1 Fix the supplied stand to the battery unit. Insert the projection of the stand into the hole on the bottom of the battery unit. Checking the Strength of Radio Waves Press the MENU button on the head mounted unit to display the menu, then select "Information." The strength of radio waves appears on the top right of the Information screen (page 28). Strength of radio waves Level of radio wave strength 4 3 2 1 0 2 Place the battery unit facing the SONY logo side toward the processor unit. Processor unit SONY logo After using Remove the stand from the battery unit and hook it on the cable of the battery unit. Strong Weak To maintain stable connection, use the system where radio waves are as strong as possible. The recommended level of radio wave strength is 2 or higher as a guide. Notes on Wireless Communication • The system cannot achieve wireless communication if there is an obstruction between the processor unit and the battery unit (e.g. room-to-room communication). • In the following cases, the status of wireless communication between the processor unit and battery unit is adversely affected, decreasing the possible communication distance and generating disturbances in video and/or audio (picture degradation, signal interruption, noise, etc.). - When the system is used in a room of reinforced concrete or stone walls or floor, or with floor heating activated - When there is some obstruction, such as a partition, door, fireproof glass, furniture with metal materials, or an electric appliance, between the processor unit and the battery unit 17