Sony HMZ-T3 Reference Guide - Page 34

DTS Neo:6 Selects matrix decoder operation. You can easily enjoy surround effects even when the input signal is in 2 channels, simply activating the matrix decoder. Cinema: Performs Cinema-mode processing of DTS Neo:6. Music: Performs Music-mode processing of DTS Neo:6. Off: Deactivates the matrix decoder. Note • "DTS Neo:6" is fixed at "Off" if the "Dolby Pro Logic IIx" setting is not "Off." Treble Adjusts high-frequency audio output. Bass Adjusts low-frequency audio output. Harmonics Equalizer On: Retrieves the tail shape of the waveform which would likely be omitted by audio compression algorithms due to its low amplitude. Off: Deactivates this function. A/V SYNC Corrects out-of-sync audio and video signals by delaying audio output. Audio output can be delayed in 10-millisecond increments, in a range of 0-100 ms. Type of Headphones Note • Some out-of-sync audio and video cannot be corrected with this function, depending on the source signal. Switches to the optimal virtual surround-sound setting for the type of headphones used. Inner Ear: Ideal for headphones worn in your ears, such as the supplied headphones. Overhead: Ideal for headphones worn over or on your ears. Dual Mono Available only with dual mono audio source signals. Not available for linear PCM source signals. Note • Surround-sound effects may not be produced correctly unless this setting matches the type of headphones used. Switches the main or sub audio output for audio source signals other than linear PCM. Main: Both left and right headphone output consists solely of the main audio content. Sub: Both left and right headphone output consists solely of the sub audio content. Main/Sub: Headphone output on one side consists of the main audio content. Output on the other side consists of the sub audio content. 34