Sony HMZ-T3 Reference Guide - Page 47
When Disposing of the System, Removing the Battery Case
View all Sony HMZ-T3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
When Disposing of the System For environment protection, remove the built-in lithium-ion battery from the system. Before removing the battery, drain the battery by removing the AC adaptor and using the system only with the battery. • Take out the lithium-ion battery for recycling. Do not open the cabinet other than when disposing of the system. • Be careful not to touch the end of a screwdriver to the lithium-ion battery when removing the battery case. If the battery is damaged, there is risk of leakage, heat generation, fire, or explosion. 2 Remove the three screws and the front panel, then disconnect the connector. Connector Front panel Note • Be careful not to damage the cord cover with metallic tweezers, etc. when you disconnect the connector. 3 Remove the six screws and the battery case. Drop off the remove battery case with the battery attached for recycling. Battery Battery case Removing the Battery Case 1 Remove the four screws, then remove the bottom panel from the battery unit. Screw Bottom panel Rubber foot Note • Do not remove the battery from the battery case. 47