Sony HTSS360 Operating Instructions - Page 20

Connecting video components The following illustration shows how to connect video components such as DVD player, DVD recorder, VCR, etc. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. DVD recorder, DVD player Audio signals Satellite tuner, Set-top box Audio signals B C Notes • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • Be sure to connect the video output of the DVD player, DVD recorder and VCR to the TV, so that the image is displayed on the TV. Refer to the operating instructions of each connected component for details. • You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. L L DIGITAL TV ANTENNA R R AUTO AUDIO IN AUDIO IN AUDIO IN CAL MIC VIDEO 1 TV SA-CD/CD COAX IN VIDEO 2 DC5V 700mA MAX HDMI DMPORT BD IN DVD IN OPT IN SAT OPT IN SAT IN AM OUT A Audio signal VCR A Audio cord (not supplied) B Coaxial digital cord (not supplied) C Optical digital cord (not supplied) 20US