Sony HTSS360 Operating Instructions - Page 26

8: Adjusting the speaker levels (TEST TONE) You can adjust the speaker levels while listening to the test tone from your listening position. ,V,v,B,b CLEAR DISPLAY AMP MENU 0 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL RETURN/EXIT MENU/HOME AMP MENU MASTER VOL +/- 1 Press AMP MENU. "SET HDMI" appears on the display. 2 Press V/v repeatedly until "LEVEL" appears, then press or b. 3 Press V/v repeatedly until "T. TONE" appears, then press or b. 4 Press V/v repeatedly to select "T. TONE Y", then press . The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Subwoofer 5 Press V/v repeatedly to select the desired speaker, then press or b. The test tone is emitted from the speaker that is being adjusted only. • FL LVL: adjusts the front left speaker level. • CNT LVL: adjusts the center speaker level. • FR LVL: adjusts the front right speaker level. • SR LVL: adjusts the surround right speaker level. • SL LVL: adjusts the surround left speaker level. • SW LVL: adjusts the subwoofer level. Notes • "CNT LVL" does not appear when you set "CNT N" in the "SP SETUP" setting. • "SR LVL" and "SL LVL" do not appear when you set "SUR N" in the "SP SETUP" setting. 6 Press V/v to adjust the speaker level, then press or b. You can adjust from -6.0 dB to +6.0 dB in 0.5 dB steps. Note If you do not adjust for a certain period, the test tone is emitted from the next speaker in sequence. 7 Repeat step 5 and 6 to adjust the speaker level. 8 After you have finished making adjustments, press V/v until "T. TONE" appears, then press or b. 9 Press V/v repeatedly to select "T. TONE N," then press . 10 Press AMP MENU. The AMP menu turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. • The test tone signals are not output from the HDMI OUT jack. 26US