Sony HVRMRC1K Operating Instructions - Page 20
Power supply, Preparing the power supply, To charge the battery pack
UPC - 027242746770
View all Sony HVRMRC1K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Power supply Preparing the power supply The following will explain the optional AC-VQ1050 AC adaptor/charger. To charge the battery pack When using an "InfoLITHIUM" battery pack (L-series, optional) as the power supply for this unit, charge the battery back as follows before use. When charging the battery pack, refer to the operating instructions supplied with the AC adaptor/charger (optional). 2 AC adaptor/ charger ACVQ1050B (optional) 3 4 1 Battery pack Mode change switch CHARGE lamp 1 Set the mode change switch of the AC adaptor/ charger to CHARGE. Notes You cannot charge when the mode change switch is set to VCR/CAMERA. 2 Connect the AC power cord to the AC adaptor/ charger. 3 Connect the AC power cord to a wall outlet. 4 When installing the battery pack, press it down while sliding it in the direction of the arrow. Charging begins and the CHARGE lamp on the AC adaptor/charger comes on. When charging is completed, all of the segments of the battery life indicator appear in the display window (normal charge). The CHARGE lamp goes off, but if you continue charging until the "FULL" battery life indicator appears, the battery capacity will be slightly longer (full charge). 5 When charging is completed, remove the battery pack from the AC adaptor/charger. Notes • This unit can be used with an "InfoLITHIUM" battery pack (L-series), but does not support the battery info function. • This unit cannot be used to charge the battery pack installed. Remaining battery time indication in the AC adaptor/charger display window This indication is provided by data communications between the AC adaptor/charger and the "InfoLITHIUM" battery pack. This unit does not have a data communications function, so the displayed time may differ from the actual remaining time. This is not a malfunction. Charging time Charging times for a completely exhausted "InfoLITHIUM" battery pack (NP-F570, NP-F770, NP-F970) are as follows. Battery pack Time for full charge (Time for normal charge) NP-F570 Approx. 145 minutes (Approx. 85 minutes) NP-F770 Approx. 230 minutes (Approx. 170 minutes) NP-F970 Approx. 310 minutes (Approx. 250 minutes) Operating times for continuous recording Operating times for continuous recording using an "InfoLITHIUM" battery pack (NP-F570, NP-F770, NP-F970) are as follows. Battery pack Operating time from full charge (Operating time from normal charge) NP-F570 Approx. 420 minutes (Approx. 380 minutes) NP-F770 Approx. 870 minutes (Approx. 780 minutes) NP-F970 Approx. 1,320 minutes (Approx. 1,180 minutes) Battery pack Before changing the battery pack, slide the POWER switch to OFF (CHG). Charging/recording/playback time • Times measured with the camcorder at 25°C (77°F) (Recommended range is 10°C to 30°C (50°F to 86°F)). • Recording and playback times are shorter at lower temperatures. • Recording and playback times are shorter depending on the conditions of use of this unit. • Except for the NP-F570/F770/F970, operating time is not ensured. 20