Sony HVRMRC1K Operating Instructions - Page 21
To install the battery pack to this unit, To connect this unit to a wall outlet, AC adaptor/charger
UPC - 027242746770
View all Sony HVRMRC1K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
AC adaptor/charger Do not short-circuit the DC plug of the AC adaptor/charger or battery terminal with any metallic objects. This may cause a malfunction. To install the battery pack to this unit Slide the battery pack in the direction of the b mark on the battery pack. To remove the battery pack from this unit Press the BATT RELEASE button of this unit and slide the battery pack in the direction of the arrow. To connect this unit to a wall outlet For prolonged operation, such as playing the recorded images, you can operate this unit from a domestic wall outlet without worrying about battery life. 1 Set the mode change switch of the AC adaptor/ charger to VCR/CAMERA. Notes When the mode change switch is set to CHARGE, there is no power supply. 2 Connect the DK cable to the DC IN jack on this unit. 3 Connect the DK cable to the AC adaptor/charger. 4 With the power cord, connect the AC adaptor/charger to a wall outlet. Notes You can leave the battery pack installed while operating from AC power. The power supply to the DC IN jack has priority. To use the AC adaptor/charger from a vehicle power supply For details, refer to the operating instructions supplied with the AC adaptor/charger. Notes on battery pack/AC adaptor • Avoid the following while the ACCESS lamp is lit. Failure to do so may cause malfunction. - Removing the battery pack - Removing the AC adaptor (while charging with the AC adaptor) • Always turn off the POWER switch before removing the battery pack or the AC adaptor. 21