Sony KD-34XS955 Operating Instructions - Page 20
Cable Box Only, Run Auto Program, as described in Setting Up the Channel List - settings
View all Sony KD-34XS955 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
SETUP Setup Cable Box Only Before connecting a cable box, see "About Using CableCARD" on page 15. For best results, use this connection if: ❑ Your cable company scrambles all channels, which requires you to use a cable box. ❑ You do not have a VCR. (If you have a VCR, see pages 22 and 24.) With this connection you can: ❑ Use the TV remote control to change channels coming through the cable box to the TV's VHF/UHF jack. (You must first program the remote control for your specific cable box.) To connect the cable box 1 Connect the CATV cable to the cable box's input jack. 2 Use a coaxial cable to connect the cable box's output jack to the TV's VHF/UHF jack. CATV cable Coaxial cable VHF/UHF TV 1 2 IN OUT Cable box 3 Run Auto Program, as described in "Setting Up the Channel List" on page 43. Notes on Using This Connection To Do This ... Do This ... Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4) and then use the cable box to switch channels. Set up the TV remote control Program the remote control. See "Programming the Remote Control" on to operate the cable box pages 49. Activate the remote control to Press SAT/CABLE FUNCTION. operate the cable box SETUP SETUP SETUP SETUP 19