Sony KD-60X690E Operating Instructions - Page 41
Additional Information, Installing the TV to the Wall
View all Sony KD-60X690E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Additional Information Installing the TV to the Wall This TV's instruction manual only shows the steps on preparing the installation of the TV before installing to the wall. Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see page 41 (Detaching the Table-Top Stand from the TV). Prepare the TV for the Wall-Mount Bracket before making cable connections. For product protection and safety reasons, Sony strongly recommends that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • The length of the screw for Wall-Mount Bracket differs depending on the WallMount Bracket thickness. Please see below illustration. 8 mm - 12 mm Screw (M6) Wall-Mount Bracket TV's rear cover • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. Note • Read the supplied Safety Booklet for additional safety information. 1 Remove the screws from the rear of the TV. US 2 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). Wall-Mount Bracket (not supplied) Screw (not supplied) Note • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. 3 Detaching the Table-Top Stand from the TV. To detach the Table-Top Stand from the TV, remove the screws. 41US