Sony KD-60X690E Operating Instructions - Page 8
Recommended Measures to Secure, the TV, secure the Stand.
View all Sony KD-60X690E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Recommended Measures to Secure the TV Consider the following measures when securing your TV to a Stand (not supplied). 1 Secure the Stand for the TV. Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the Stand. For each angle brace use the appropriate hardware to: Attach one side of the angle brace to the wall stud. Attach the other side to the Stand. Angle braces (not supplied) Screw hole on the rear cover M4 machine screw (not supplied) Rope or chain (not supplied) Screw (not supplied) The length of the M4 machine screw differs depending on the rope or chain diameter. Please refer to below illustration. 8 mm - 12 mm Stand Screw M4 2 Secure the TV to the Stand. Use the optional hardware listed as follows (not supplied): M4 machine screws (screwed into the TV's rear cover). A screw or similar (attach it to the Stand). Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. Rope or chain TV's rear cover 3 Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). 8US