Sony KDL-40WL135 Operating Instructions - Page 13
Vhf/uhf/cable - power adapter
UPC - 027242731981
View all Sony KDL-40WL135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Item 2 HDMI IN 1 HDMI/ R-AUDIO-L 3 HDMI IN 3 HDMI Description HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc Player, A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 1 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 1. DVI-to-HDMI cable Audio cable DVI-to-HDMI adapter ~ • HDMI connection is necessary to view 480i, 480p, 720p, 1080i, 1080p and 1080/24p formats. Note that this TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines. • Be sure to use only an HDMI cable that bears the HDMI logo. • When HDMI control compatible equipment is connected, communication with the connected equipment is supported. Refer to page 38 to set up this communication. • When connecting a HDMI control compatible audio system with HDMI jack, be sure to also connect to the OPTICAL OUT jack. 4 VIDEO IN 1 S VIDEO Connects to the S VIDEO output jack of your VCR or other video equipment that has S VIDEO. S VIDEO provides better picture quality than composite video (5) connection. If both composite video and S VIDEO are connected, S VIDEO signal has priority. 5 VIDEO IN 1/3 Connects to the composite video and audio output jacks on your A/V equipment such as VIDEO/L(MONO)- a VCR or other video equipment. A third composite video and audio (VIDEO IN 2) is AUDIO-R located on the left side of the TV. 6 COMPONENT IN 1/2 (1080p/1080i/ 720p/480p/480i)/ L-AUDIO-R 7 DMex/ SERVICE Connects to your equipment's component video (YPBPR) and audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (4) or the composite video (5) connection. ~ • Component video (YPBPR) connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note that this TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines. This USB port is for service only unless you are connecting the optional BRAVIA external module (DMex). 8 DIGITAL OUT (OPTICAL) Connects to the optical audio input of your digital audio equipment that is PCM/Dolby Digital compatible. Dolby Digital Audio signal from the HDMI input will be output as PCM. 9 AUDIO OUT (VAR/FIX) Connects to the left and right audio input jacks of your analog audio equipment. You can use these outputs to listen to your TV's audio through your stereo system. 0 AC IN Connects the supplied AC power cord. qa VHF/UHF/CABLE RF input that connects to your Cable or VHF/UHF antenna. 13