Sony KDL-40WL135 Operating Instructions - Page 46

Anchor the TV to the wall.

Page 46 highlights

3 Anchor the TV to the wall. Use the hardware listed below (not supplied). • Two M6 × 7-10 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the TV). • Rope or chain (attach to one M6 anchor bolt). • Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope through the wall-anchor, then attach to the other M6 anchor bolt). Anchor bolts Wall-mount holes Rope or chain Wallanchor ~ • Measure 2 provides minimal protection against the TV toppling over. For further protection, follow all three measures recommended above. • When using an electric screwdriver, set the torque setting to approximately 2 N·m {20 kgf·cm}. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

46
3
Anchor the TV to the wall.
Use the hardware listed below (not supplied).
• Two M6
×
7-10 mm anchor bolts (screw into
the top-most wall-mount holes located on the
rear of the TV).
• Rope or chain (attach to one M6 anchor bolt).
• Wall-anchor (attach to the wall stud) strong
enough to support the weight of the TV (pass
the rope through the wall-anchor, then attach
to the other M6 anchor bolt).
~
• Measure 2 provides minimal protection against the TV
toppling over. For further protection, follow all three
measures recommended above.
• When using an electric screwdriver, set the torque
setting to approximately 2 N·m {20 kgf·cm}.
Rope or
chain
Anchor bolts
Wall-mount
holes
Wall-
anchor