Sony MEX-BT3100P Operating Instructions - Page 22
Pairing, Set the Bluetooth device to search
View all Sony MEX-BT3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Pairing The Bluetooth device (cellular phone, audio device, etc.) and this unit need to be "paired" before use between each other via the Bluetooth function. 4 If passkey* input is required in the display of the device to be connected, input "0000." If the device supports Bluetooth version 2.1, passkey input is not required. * Passkey may be called "passcode," "PIN code," "PIN number" or "Password," etc., depending on the device. Tips • For details on pairing for a Bluetooth device, refer to the operating instructions supplied with the device. • You can pair up to 9 Bluetooth devices with this unit. 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and rotate the control dial until "PAIRING" appears, then press it. The unit enters pairing standby mode. Flashing 3 Set the Bluetooth device to search for this unit. A list of detected devices appears in the display of the device to be connected. This unit is displayed as "Sony Automotive" on the device to be connected. 22 Input passkey "0000" This unit and the Bluetooth device memorize each other's information, and when pairing is made, stays lit. The unit is ready for connection to the device. Note If " " continues to flash, the Bluetooth device may not be compatible with this unit. For details on compatible devices, visit the support site on the back cover. 5 Select this unit on the Bluetooth device to be connected. " " or " " appears when the connection is made. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. • It may take time to search or connect. • Depending on the device, the confirmation display of the connection appears before inputting the passkey. • The time limit for inputting the passkey differs depending on the device. If the time expires, perform the pairing procedure from the beginning again. • This unit cannot be connected to a device that supports only HSP (Head Set Profile).