Sony MEX-BT3100P Operating Instructions - Page 24
Handsfree calling, Connecting an audio device, Receiving calls
View all Sony MEX-BT3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Tip With Bluetooth signal on: when the ignition is turned to on, this unit reconnects automatically to the last-connected cellular phone. But automatic connection also depends on the cellular phone's specification. If automatic connection is not made, connect manually. Handsfree calling Once the unit is connected to the cellular phone, you can make/receive handsfree calls by operating this unit. Connecting an audio device 1 Press and rotate the control dial until "BT SIGNL" appears, then press it. " " lights up when Bluetooth signal is activated. 2 Turn on the audio device and activate the Bluetooth signal. 3 Connect to this unit using the audio device. " " appears when the connection is made. Connecting the last-connected audio device from this unit 1 Make sure the Bluetooth signal of the audio device is activated. 2 Press repeatedly until "BT AUDIO" appears. 3 Press (PAUSE). " " flashes while the connection is being made, then stays lit while connected. 24 Before handsfree calling, check the following: Make sure that " " and " " appear in the display. If " " and " " do not appear, perform the connection procedure (page 23). If you cannot connect this unit and the cellular phone via the Bluetooth function, perform the pairing procedure (page 22). Receiving calls When receiving a call, a ringtone is output from your car speakers or the connected cellular phone. The caller's name or phone number appears in the display. 1 Press when a call is received with a ringtone. The phone call starts. Notes • Depending on the cellular phone, the caller's name may appear. • The ringtone and talker's voice are output only from the front speakers. Rejecting a call Press and hold for 1 second. Ending a call Press again.