Sony MEX-BT3100P Operating Instructions - Page 7
Canceling the DEMO mode, Setting the clock, Detaching the front panel
View all Sony MEX-BT3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Canceling the DEMO mode You can cancel the demonstration display which appears while this unit is turned off. 1 Press rotate the control dial until "DISPLAY" appears, then press it. 2 Rotate the control dial until "DEMO" appears, then press it. 3 Rotate the control dial to select "DEMO-OFF," then press it. The setting is complete. 4 Press (BACK) to return to the previous display. The display returns to normal reception/ play mode. Setting the clock The clock uses a 12-hour digital indication. 1 Press rotate the control dial until "GENERAL" appears, then press it. 2 Rotate the control dial until "CLOCK- ADJ" appears, then press it. The hour indication flashes. 3 Rotate the control dial to set the hour and minute. To move the digital indication, press 4 After setting the minute, press The setup is complete and the clock starts. To display the clock, press Detaching the front panel You can detach the front panel of this unit to prevent theft. 1 Press and hold The unit is turned off. 2 Press the front panel release button , then remove the panel by pulling it towards you. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. Note Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. Attaching the front panel Engage part of the front panel with part of the unit, as illustrated, and push the left side into position until it clicks. 7