Sony MHC-771 Operating Instructions - Page 14

Presetting Radio, Stations, Playing Preset Radio

Page 14 highlights

Presetting Radio Stations You can store radio frequencies in the tuner's memory to tune in your favorite stations quickly. You can preset up to 20 FM stations and 10 AM stations. Use the buttons on the unit for presetting stations. POWERnON Playing Preset Radio Stations Once you have preset the stations, use the JOG dial to quickly tune in your favorite stations. POWERnON 1 4 2 3 1 Tune in a station you want to store in the preset memory. 2 Press TUNER MEMORY. "MEMORY" and the preset channel number appear in the display. CLIP TUNER 1 TUNED STEREO 63 125 250 500 1k 2k 4k 8k 16k(Hz) AUTO VOLUME Preset channel number 3 Turn the JOG dial to select a preset channel number. 4 Press ENTER/NEXT. The station is stored at the preset channel number you have decided on. 5 Repeat steps 1 to 4 for each station you want to store. To erase a stored station Store a new station at a previously used preset channel number. It will erase the old station and replace it with the new station. If you have trouble storing a station or if you made a mistake Make sure "MEMORY" is lit in the display. If not, press TUNER MEMORY again so that "MEMORY" appears (for about eight seconds) in the display, and then proceed with steps 3 and 4. 2 3 1 Press TUNER/BAND repeatedly to select the band you want. FM AM CLIP TUNER DOLBY NR OFF 63 125 250 500 1k 2k 4k 8k 16k(Hz) MHz VOLUME 2 Press TUNING MODE so that "PRESET" appears in the display. CLIP TUNER 63 125 250 500 1k 2k 4k 8k 16k(Hz) VOLUME MHz PRESET 3 Turn the JOG dial (or press or on the remote) to tune in a preset station. The station frequency appears and the station begins broadcasting. EN 13 Chapter 3: the Radio

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

EN
Chapter 3: the Radio
13
Presetting Radio
Stations
You can store radio frequencies in the
tuner’s memory to tune in your favorite
stations quickly. You can preset up to
20 FM stations and 10 AM stations.
Use the buttons on the unit for presetting
stations.
1
Tune in a station you want to store in
the preset memory.
2
Press TUNER MEMORY.
“MEMORY” and the preset channel
number appear in the display.
3
Turn the JOG dial to select a preset
channel number.
4
Press ENTER/NEXT.
The station is stored at the preset
channel number you have decided on.
5
Repeat steps 1 to 4 for each station you
want to store.
To erase a stored station
Store a new station at a previously used
preset channel number. It will erase the old
station and replace it with the new station.
If you have trouble storing a station or if
you made a mistake
Make sure “MEMORY” is lit in the display.
If not, press TUNER MEMORY again so
that “MEMORY” appears (for about eight
seconds) in the display, and then proceed
with steps 3 and 4.
Playing Preset Radio
Stations
Once you have preset the stations, use the
JOG dial to quickly tune in your favorite
stations.
1
Press TUNER/BAND repeatedly to
select the band you want.
2
Press TUNING MODE so that
“PRESET” appears in the display.
3
Turn the JOG dial (or press
or
on the remote) to tune in a preset
station.
The station frequency appears and the
station begins broadcasting.
125
63
250
500
1k
2k
4k
8k
16k(Hz)
DOLBY NR
OFF
TUNER
CLIP
MHz
VOLUME
125
63
250
500
1k
2k
4k
8k
16k(Hz)
TUNER
CLIP
MHz
PRESET
VOLUME
POWER
n
ON
3
4
2
Preset channel number
125
63
250
500
1k
2k
4k
8k
16k(Hz)
TUNER
CLIP
1
TUNED
STEREO
AUTO
VOLUME
FM
AM
POWER
n
ON
3
1
2