Sony MHC-MDX10 Operating Instructions - Page 29

Basic Operations Playing a tape You can use TYPE I (normal) tape. 1 Press TAPE (or FUNCTION on the remote repeatedly to select "TAPE"). 2 Load a tape. Push PUSH Z OPEN/CLOSE to open the deck. Load a tape into the deck with the side you want to play back facing forward. Push PUSH Z OPEN/CLOSE again to close the deck. 3 Press NX (or N on the remote). The tape starts playing. Other operations To Do this Stop playback Press x. Pause playback Press NX (or X on the remote). Press NX (or X on the remote) again to resume playback. Fast forward or rewind Press m or M. To return to normal playback, press NX (or N on the remote). Remove a tape Push PUSH Z OPEN/ CLOSE when playback is stopped. Note To erase content of the tape, do the recording in tape function. Using optional components 1 Connect a TV or VCR to the VIDEO (AUDIO IN) L/R jacks using an audio analog cord (not supplied). Connect an portable audio player to the AUDIO INPUT L/R jacks using an audio analog cord (not supplied). 2 Turn MASTER VOLUME counterclockwise (or press VOLUME - on the remote) to turn down the volume. 3 To listen to TV or VCR, press VIDEO (or FUNCTION on the remote repeatedly to select "VIDEO"). To listen to portable audio player, press AUDIO (or FUNCTION on the remote repeatedly to select "AUDIO"). 4 Start playing the connected component. 5 Turn MASTER VOLUME (or press VOLUME +/- on the remote) to adjust the volume. 29GB