Sony MHC-MDX10 Operating Instructions - Page 41

Additional Information, Troubleshooting

Page 41 highlights

To Do this Cancel the Play 1 Press CLOCK/TIMER Timer or SELECT. Recording Timer "SELECT" appears in the display. 2 Press . or > repeatedly to select "TIMER OFF?", then press ENTER. Notes • The Play Timer and Recording Timer will not be activated if the system is turned on or if "STANDBY" flashes in the display. • The Play Timer setting remains as long as the setting is not canceled manually. • The Recording Timer is automatically canceled after the Recording Timer has been activated. • The volume is reduced to minimum during Recording Timer. • The system is not turned off on the preset time during the USB erase operation. The system will only automatically turns off after the USB erase operation finish. Additional Information Troubleshooting Should you encounter a problem with your system, do the following: 1 Make sure the power cord and speaker cords are connected correctly and firmly. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Additional Information Continued l 41GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

41
GB
Additional Information
Notes
The Play Timer and Recording Timer will not
be activated if the system is turned on or if
“STANDBY” flashes in the display.
The Play Timer setting remains as long as the
setting is not canceled manually.
The Recording Timer is automatically
canceled after the Recording Timer has been
activated.
The volume is reduced to minimum during
Recording Timer.
The system is not turned off on the preset time
during the USB erase operation.
The system will only automatically turns off
after the USB erase operation finish.
Troubleshooting
Should you encounter a problem with
your system, do the following:
1
Make sure the power cord and
speaker cords are connected
correctly and firmly.
2
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists after doing all of
the above, consult your nearest Sony
dealer.
Note that if service personnel changes
some parts during repair, these parts may
be retained.
To
Do this
Cancel the Play
Timer or
Recording Timer
1
Press CLOCK/TIMER
SELECT.
“SELECT” appears in
the display.
2
Press
.
or
>
repeatedly to select
“TIMER OFF?”, then
press ENTER.
Additional Information
Continued
l