Sony MZ-NHF800 Operating Instructions - Page 73

On the recorder, Selecting the disc mode (Disc Mode), Disc Mode.

Page 73 highlights

On the recorder Jog dial NAVI/ MENU 5-way control key (NENT) 1 Enter the menu and select "Option" - "QuickMode". 2 Turn the jog dial until "Quick On" appears in the display, and then press NENT to enter the selection. Selecting the disc mode (Disc Mode) When you insert a 60/74/80-minute standard disc (blank) into the recorder, you can use this function to specify use of the disc in Hi-MD mode or MD mode. If you want to use the disc recorded on this unit on another component that does not support Hi-MD, record the disc with "Disc Mode" in the menu set to "MD". DISPLAY 2 Slide the jog lever repeatedly until "Hi-MD" or "MD" appears in the display, and then press the jog lever to enter the selection. Notes • Even if you select "MD" as the "Disc Mode" setting, the operation mode can only be "HiMD" when using a 1GB Hi-MD disc. • The operation mode set in the "Disc Mode" menu is applied to a blank 60/74/80-minute standard disc used on the recorder even if a different operation mode was selected in the SonicStage software or a different operation mode appeared on the display after the disc was formatted by the SonicStage software. On the recorder Jog dial NAVI/ MENU 5-way control key (NENT) 1 Enter the menu and select "Option" - "Disc Mode". 2 Turn the jog dial until "Hi-MD" or "MD" appears in the display, and then press NENT to enter the selection. Jog lever 1 Enter the menu and select "Option" - "Disc Mode". 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

73
1
Enter the menu and select “Option” -
“QuickMode”.
2
Turn the jog dial until “Quick On”
appears in the display, and then press
N
ENT to enter the selection.
Selecting the disc
mode (Disc Mode)
When you insert a 60/74/80-minute
standard disc (blank) into the recorder,
you can use this function to specify use of
the disc in Hi-MD mode or MD mode.
If you want to use the disc recorded on
this unit on another component that does
not support Hi-MD, record the disc with
“Disc Mode” in the menu set to “MD”.
1
Enter the menu and select “Option” -
“Disc Mode”.
2
Slide the jog lever repeatedly until
“Hi-MD” or “MD” appears in the
display, and then press the jog lever to
enter the selection.
Even if you select “MD” as the “Disc Mode”
setting, the operation mode can only be “Hi-
MD” when using a 1GB Hi-MD disc.
The operation mode set in the “Disc Mode”
menu is applied to a blank 60/74/80-minute
standard disc used on the recorder even if a
different operation mode was selected in the
SonicStage software or a different operation
mode appeared on the display after the disc
was formatted by the SonicStage software.
1
Enter the menu and select “Option” -
“Disc Mode”.
2
Turn the jog dial until “Hi-MD” or
“MD” appears in the display, and then
press
N
ENT to enter the selection.
On the recorder
5-way control key
(
N
ENT)
NAVI/
MENU
Jog dial
DISPLAY
Jog lever
Notes
On the recorder
5-way control key
(
N
ENT)
NAVI/
MENU
Jog dial