Sony MZ-NHF800 Operating Instructions - Page 91
Others
View all Sony MZ-NHF800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Symptom You cannot transfer tracks that will fill up the remaining recording time on the disc. The disc size displayed on the computer is not the same as the disc size printed on the disc. You cannot operate the recorder ("PC - -MD" appears). Cause/Remedy • The minimum recordable time on a disc is normally 2 seconds in stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4 stereo mode. When you transfer a track from your computer, the recorder needs a 2-second (or 4- or 8-second) space for a track even if the track is under 2 seconds (or 4 or 8 seconds) in length. Also, the recorder inserts a 2-second (or 4 -or 8-second) space in between tracks during transfer operation. For this reason, the recorder needs an additional 6 seconds (or 12 or 24 seconds) for each track. This reduces the maximum recording time for each track by 6 seconds (or 12 or 24 seconds) during transfer operation (in MD mode only). • The difference is due to the use of the binary system to indicate the disc size on the computer and the decimal system to express the disc size on the disc and other recording media. For details on the disc size, see page 80. • You cannot operate the recorder while the recorder is connected to the computer. Others Symptom Cause/Remedy Some menu items • "Menu Mode" is set to "Simple". cannot be displayed. , Set the "Menu Mode" to "Advanced" to display all the menu items. The recorder does not work or works poorly. • The volume is low. , Turn up the volume. • No disc is inserted. , Insert a recorded disc. • The HOLD function is turned on ("HOLD" appears in the display when you press an operation button on the recorder). , On the recorder, disable HOLD by sliding the HOLD switch to the opposite direction of the arrow (pages 14, 17). • The lid is not firmly closed. , Close the lid until it clicks. Then slide OPEN to open the lid. • Moisture has condensed inside the recorder. , Take the disc out and leave the recorder in a warm place for several hours until the moisture evaporates. • The AC power adaptor is not firmly connected. , Connect the AC power adaptor firmly to the DC IN 3V jack on the recorder. • The alkaline dry battery is weak ("LOW BATTERY" flashes or nothing appears). , Replace the dry battery with a new one, or use the supplied AC power adaptor. 91