Sony MZ-NHF800 Operating Instructions - Page 90
While using the radio, While the recorder is connected to the computer
View all Sony MZ-NHF800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
While using the radio Symptom The radio does not operate. e flashes in the display on the remote control and the radio does not operate. Cause/Remedy • The supplied remote control is connected to other unit than this recorder. The supplied remote control should be used with this recorder only. • After confirming that "NO DISC" has disappeared from the display on the remote control, press RADIO ON/OFF again on the remote control. • The alkaline dry battery is used up. , Replace the battery with a new one (page 17). While the recorder is connected to the computer Symptom Cause/Remedy The recorder is not recognized by the computer. • The dedicated USB cable is not firmly connected. , Connect the dedicated USB cable firmly to the recorder and the computer. • A USB hub is used. , Connect the dedicated USB cable directly to the USB port of the computer. • Network communication has failed. , Disconnect the dedicated USB cable, wait at least 2 seconds, and then reconnect it. If the recorder is still not recognized, disconnect the dedicated USB cable, restart the computer, and then connect the dedicated USB cable again. Even though the recorder is recognized by the computer, it does not operate normally. • A USB hub is used. , Connect the dedicated USB cable directly to the USB port of the computer. • You are using the recorder at a place with vibration. , Use the recorder at a place with no vibration. The recorder cannot be used as a storage device. • The SonicStage or MD Simple Burner software is active. , Close the SonicStage or MD Simple Burner software. • A standard disc is inserted. , Insert a disc used in Hi-MD mode. Only discs used in Hi-MD mode can be used as a storage media. The playing time of a transferred track is different from the time that appears on your computer monitor. This is due to a calculation discrepancy between the recorder and the computer. 90