Sony PCGA-DDRW2 Operating Instructions 1 - Page 17
Connect the supplied i.LINK cable to the i.LINK connector
View all Sony PCGA-DDRW2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1 Turn on the computer. 2 Connect the AC power cord to the supplied AC adapter, plug the AC power cord into an AC outlet, and then plug the cable of the adapter into the DC IN connector on the drive. The green POWER indicator of the drive lights up. 3 Connect the supplied i.LINK cable to the i.LINK connector on the rear of the drive. i.LINK connector i.LINK cable 4 Connect the other end of the supplied i.LINK cable to the i.LINK connector on the computer. The drive is detected and identified by the computer. i.LINK cable i.LINK connector z Hint When this drive is connected to your computer for the first time, it takes a moment for the computer to detect the drive. Continued on next page 17 GB
17
GB
Continued on next page
1
Turn on the computer.
2
Connect the AC power cord to the supplied AC adapter, plug
the AC power cord into an AC outlet, and then plug the cable
of the adapter into the DC IN connector on the drive.
The green POWER indicator of the drive lights up.
3
Connect the supplied i.LINK cable to the i.LINK connector on
the rear of the drive.
4
Connect the other end of the supplied i.LINK cable to the
i.LINK connector on the computer.
The drive is detected and identified by the computer.
z
Hint
When this drive is connected to your computer for the first time, it takes a moment
for the computer to detect the drive.
i.LINK connector
i.LINK connector
i.LINK cable
i.LINK cable