Sony PEG-NX60 Troubleshooting Q&A - Page 25
My Computer, Properties, Hardware, Device Manager, Device, Manager
View all Sony PEG-NX60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
You cannot perform a HotSync® operation Check that the USB port of your computer is enabled If you are using a Windows 95 pre-installed computer or other old type of computer equipped with a USB port, the USB port may be disabled by default. If another device such as a USB mouse cannot be used, check the BIOS setting of your computer. Also check the Device Manager. Right-click on My Computer and select Properties (Only in case of Windows 2000 Professional/Windows XP, select Hardware tab and then select Device Manager). Click the Device Manager tab and check that USB controller is listed in the Device Manager screen. 25
25
You cannot perform a HotSync
®
operation
Check that the USB port of your computer is enabled
If you are using a Windows 95 pre-installed computer or other old type of
computer equipped with a USB port, the USB port may be disabled by default.
If another device such as a USB mouse cannot be used, check the BIOS setting
of your computer.
Also check the Device Manager. Right-click on
My Computer
and select
Properties
(Only in case of Windows 2000 Professional/Windows XP,
select
Hardware
tab and then select
Device Manager
). Click the
Device Manager
tab and check that USB controller is listed in the
Device
Manager
screen.