Sony PEG-UX40 Read This First Operating Instructions - Page 19
Step 2: Connecting your CLIÉ handheld and computer via the USB cable
View all Sony PEG-UX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Setting up your CLIÉ™ handheld Step 2: Connecting your CLIÉ handheld and computer via the USB cable You can synchronize data between your CLIÉ handheld and computer by connecting them with the supplied USB cable after installing Palm™ Desktop for CLIÉ. About the USB cable The supplied USB cable has two connectors. Connect the "A" plug to the USB port of your computer and the mini "B" plug to the USB connector of your CLIÉ handheld. "A" plug mini "B" plug 1 Connect the mini "B" plug of the USB cable to the USB connector of your CLIÉ handheld. Open the USB connector cover 2 Connect the "A" plug of the USB cable to the USB port of your computer. To the USB port of your computer Note Be sure to connect the USB cable directly to a USB port of your computer. If the USB cable is connected to a computer via another device, such as a USB hub, the HotSync® operation may not work properly. 19