Sony PEG-UX40 Read This First Operating Instructions - Page 8
Setting up your CLIɒ handheld, Step 1 - battery
View all Sony PEG-UX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting up your CLIÉ™ handheld Perform the following before setting up your CLIÉ handheld. Step 1: Charging your CLIÉ handheld Step 2: Performing the initial setup after turning on your CLIÉ handheld for the first time Step 1: Charging your CLIÉ handheld Before using your CLIÉ handheld for the first time, be sure to fully charge the battery. To a wall outlet 1 Connect the AC power adapter to the charger cradle's AC power adapter connector. 2 Connect the AC power adapter to a wall outlet. 3 Align and attach the front clasps of the charger cradle with the holes on the back of your CLIÉ handheld (1), then gently lay it down (2). The POWER LED of your CLIÉ handheld turns on when charging starts. Tips • To remove your CLIÉ handheld from the charger cradle, lift up from the rear (camera lens side). • Clean the connectors if they get dirty. 8