Sony PRS-505/SC User's Guide - Page 68
Troubleshooting, Reset the Reader by pressing the Reset button with, a small pin or clip. - red
View all Sony PRS-505/SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Troubleshooting Troubleshooting If the Reader does not function as expected, try the following steps to resolve the issue. Reset the Reader by pressing the Reset button with a small pin or clip. The content and settings stored on the Reader are not affected by resetting, and no information is erased. After pressing the Reset button, turn on the Reader by sliding the POWER switch. Note • When you connect the Reader to your computer after a reset, it is necessary to turn on the Reader again. Otherwise, it takes about 40 minutes until (indicating connection via USB) is displayed, and you will not be able to turn on the Reader by the POWER switch during this time. The indicator lights up in red while is not displayed, and the Reader is charged. In this case, disconnect the USB cable from the Reader, then turn on the Reader and reconnect it. Check the symptoms in "Troubleshooting." Continued 68 US