Sony SLV-D370P Operating Instructions - Page 104
VCR Troubleshooting, Operation, Symptom, Remedy, Playback, Recording
View all Sony SLV-D370P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Operation Symptom Remedy The subtitle language cannot be changed or turned off. • Try using the DVD's menu instead of the direct selection button on the remote (page 65). • Multilingual subtitles are not recorded on the DVD being played. • The DVD prohibits the changing of the subtitles. The angles cannot be changed. • Try using the DVD's menu instead of the direct selection button on the remote (page 65). • Multi-angles are not recorded on the DVD being played. • The DVD prohibits changing of the angles. The player does not operate properly. • When static electricity, etc., causes the player to operate abnormally, unplug the player. VCR Troubleshooting Symptom Remedy The playback picture does not appear • Make sure the TV is set to the channel for the VCR. If on the TV screen. you are using a monitor, set it to video input. Playback The picture is not clear. • Adjust the tracking with the TRACKING +/- buttons. • The video heads are dirty (see "On cleaning the video heads" (page 3)). Clean the video heads using a Sony video head cleaning cassette. If a Sony cleaning cassette is not available in your area, have the heads cleaned at your nearest Sony dealer (a standard service fee will be charged). Do not use a commercially available liquid type cleaning cassette, as it may damage the video heads. • The video heads may have to be replaced. Consult your local Sony dealer for more information. The picture rolls vertically during picture search. • Adjust the vertical hold control on the TV or monitor. The picture has no sound. • The tape is defective. • If you made A/V connections, check the audio cord connection. A TV program does not appear on the TV screen. • Make sure the TV is set to the channel for the VCR. If you are using a monitor, set it to video input. • Select the correct source with the INPUT SELECT or CH +/- buttons. Select a channel number when recording TV programs; select "L1" or "L2" when recording from other equipment. Recording TV reception is poor. • Adjust the TV antenna. The tape starts playing as soon as it is • The safety tab has been removed. To record on this tape, inserted. cover the tab hole. The tape is ejected when you press • Check that the safety tab has not been removed. z REC. Nothing happens when you press z REC. • Make sure the tape is not at its end. 104US Troubleshooting