Sony SPP-ID975 Operating Instructions - Page 15
HOME LOCAL, Getting Started, To enter the local area code For 10 digits, phone numbers users
View all Sony SPP-ID975 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started Notes • If the home area code is already entered, it appears on the display in step 4. To enter a different home area code, see "To change the home area code" below. • Do not allow more than 20 seconds to elapse between each step of the procedure. Tips • You may press Jog Dial instead of (PGM) in step 6. • To check the current home area code, perform steps 1 to 4. The home area code appears on the display for about 20 seconds. To change the home area code 1 Perform steps 1 to 4 on page 14. The current home area code appears on the display. 2 Turn Jog Dial down to erase the current home area code. 3 Enter a new home area code using the dialing keys. 4 Press (PGM). You will hear a long confirmation beep. To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number). If a call does not match one of the local area codes you entered, the phone number will be registered with 11 digits in the Caller ID list (1 + area code + number). Some regions of the country allow you to have more than one local area code. (Up to five local area codes can be entered in this phone.) 1 Perform steps 1 to 3 on page 14. 2 Turn Jog Dial up to make "LOCAL" flash. HOME LOCAL 3 Press Jog Dial. 4 Select the number ("#1" to "#5") to enter the local area code by turning Jog Dial. #1 #2 #3 #4 #5 continued Getting Started 15US