Sony SPP-ID975 Operating Instructions - Page 16
To change the local area code, Press Jog Dial.
View all Sony SPP-ID975 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step 4: Entering the area code (continued) 5 Press Jog Dial. "ENTER AREA CODE" appears on the display. 6 Enter three digits of the local area code using the dialing keys. 7 Press (PGM). You will hear a long confirmation beep. Notes • If the local area code is already entered, it appears on the display in step 5. To enter a different local area code, see "To change the local area code" below. • Do not allow more than 20 seconds to elapse between each step of the procedure. Tips • You may press Jog Dial instead of (PGM) in step 7. • To check the current local area code, perform steps 1 to 5. The local area code appears on the display for about 20 seconds. To change the local area code 1 Perform steps 1 to 5 on page 15. The current local area code appears on the display. 2 Turn Jog Dial down to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You will hear a long confirmation beep. To erase the local area code You can erase the local area code. Perform steps 1 and 2 above, then press (PGM). The local area code will be erased, and you will hear a long confirmation beep. 16US Getting Started