Sony SPP-ID975 Operating Instructions - Page 20

Basics, Making calls

Page 20 highlights

Basics Making calls (HOLD) (*TONE) (MUTING) VOL switch (REDIAL) 1 Pick up the handset from the base phone. 2 Press (TALK) and wait until "TALK" appears on the display. The display also shows the operation duration in hours, minutes and seconds. You will then hear a dial tone. "HANDSET IN USE" appears on the display of the base phone and the LINE lamp on the base phone lights up. If "CHANNEL SEARCHING" appears on the display, move closer to the base phone. 3 Dial the phone number. 4 When you're done talking, press (OFF) or replace the handset on the base phone. The display and the LINE lamp on the base phone go off. Additional tasks To Do this Adjust the handset volume Set the VOL switch to H (high), M (middle) or L (low). Put a call on hold Press (HOLD). "HOLD" appears on the display. Press (HOLD) again to resume the conversation. Mute your voice Press (MUTING) to disable the microphone. "MUTING" appears on the display. Press (MUTING) again to cancel. Switch to tone dialing temporarily Press (*TONE) after you're connected. The line will remain in tone dialing until disconnected. 20US Basics

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116

Basics
20
US
Do this
Set the VOL switch to H (high), M (middle) or L
(low).
Press
(HOLD)
. “HOLD” appears on the display.
Press
(HOLD)
again to resume the conversation.
Press
(MUTING)
to disable the microphone.
“MUTING” appears on the display. Press
(MUTING)
again to cancel.
Press
(*TONE)
after you’re connected.
The line will remain in tone dialing until
disconnected.
To
Adjust the handset volume
Put a call on hold
Mute your voice
Switch to tone dialing
temporarily
1
Pick up the handset from the
base phone.
2
Press
(TALK)
and wait until
“TALK” appears on the display.
The display also shows the
operation duration in hours,
minutes and seconds.
You will then hear a dial tone.
“HANDSET
IN
USE” appears
on the display of the base phone
and the LINE lamp on the base
phone lights up.
If “CHANNEL
SEARCHING”
appears on the display, move
closer to the base phone.
3
Dial the phone number.
4
When you’re done talking, press
(OFF)
or replace the handset on
the base phone.
The display and the LINE lamp
on the base phone go off.
(REDIAL)
(*TONE)
Basics
Making calls
Additional tasks
VOL switch
(HOLD)
(MUTING)