Sony SPP-ID975 Operating Instructions - Page 30

Phone Directory (continued) 4 Press (PGM). "ENTER NUMBER" appears. 5 Enterthephonenumber. You can enter up to 32 digits, including a tone and a pause, each of which is counted as one digit. When the phone number of 17 digits or more has been entered , the phone number appears in two lines. SONY 1234567 1234567890123456 12 6 Press (PGM). You will hear a long confirmation beep, and the name and the number are stored. The display goes off. Notes • If you intend to save a 51st phone number, you will hear five short error beeps and "MEMORY FULL" will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 32). • Donotallowmorethan20secondstoelapsebetweeneachstepofthe procedure. • ThetotalnumberofphonenumberswhichcanbestoredintothePhone Directory varies according to the number of digits of each phone number. If all the phone numbers consist of up to 16 digits, you can store up to 50 phone numbers. However, as the Phone Directory uses two-phone number memory to store one phone number of 17 digits or more, the total number of phone numbers which can be stored in the Phone Directory decreases two by two every time you store a phone number of 17 digits or more. Tips • If you have entered a wrong name or number in step 3 or 5, turn Jog Dial down to erase it. Then enter the correct name or number. • You may press Jog Dial instead of (PGM) in steps 4 and 6. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 5 above, do as follows: 1 Entertheoutsidelineaccessdigit(e.g.,9). 2 Press (PAUSE). 30US Telephone Features