Sony STR-DE875 Operating Instructions - Page 19

Multi Channel Surround Setup

Page 19 highlights

Hooking Up and Setting Up the Speaker System Multi Channel Surround Setup For the best possible surround sound all speakers should be the same distance from the listening position (A). However, this unit lets you to place the center speaker up to 5 feet (1.5 meters) closer (B) or the surround back speakers up to 15 feet (4.5 meters) closer (D) and the surround speakers up to 15 feet (4.5 meters) closer (C) to the listening position. The front speakers can be placed from 3 to 40 feet (1.0 to 12.0 meters) from the listening position (A). You can place the surround speakers either behind you or to the side, depending on the shape of your room (etc.). You can use the center speaker as a surround back speaker. When placing surround speakers to your side B A A 45° C C 90° z When setting up the surround back speaker Set the speaker at least one meter behind the listening position. It is recommended to place the speaker at an equal distance from the surround left or right speakers. If there is no space behind the listening position, set the speaker above the listening position by placing it on a stand or hanging it from the ceiling. To prevent speaker damage or injury in case the speaker falls, make sure that it is properly fixed in place. Note Do not place the center speaker farther away from the listening position than the front speakers. Specifying the speaker parameters 1 Press ?/1 to turn on the receiver. 2 Press SET UP. 3 Press the cursor buttons ( or ) to select the parameter you want to adjust. 4 Turn the jog dial to select the setting you want. The setting is stored automatically. 5 Repeat steps 3 and 4 until you have set all of the parameters that follow. D 20° When placing the surround speakers behind you B A A 45° C C 90° D 20° 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

19
Hooking Up and Setting Up the Speaker System
45
°
90
°
20
°
A
A
B
C
C
D
45
°
90
°
20
°
A
A
B
C
C
D
Multi Channel Surround Setup
For the best possible surround sound all speakers should
be the same distance from the listening position (
A
).
However, this unit lets you to place the center speaker up
to 5 feet (1.5 meters) closer (
B
) or the surround back
speakers up to 15 feet (4.5 meters) closer (
D
) and the
surround speakers up to 15 feet (4.5 meters) closer (
C
) to
the listening position. The front speakers can be placed
from 3 to 40 feet (1.0 to 12.0 meters) from the listening
position (
A
).
You can place the surround speakers either behind you or
to the side, depending on the shape of your room (etc.).
You can use the center speaker as a surround back
speaker.
When placing surround speakers to your side
When placing the surround speakers behind you
z
When setting up the surround back speaker
Set the speaker at least one meter behind the listening position. It
is recommended to place the speaker at an equal distance from
the surround left or right speakers. If there is no space behind the
listening position, set the speaker above the listening position by
placing it on a stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls, make sure that
it is properly fixed in place.
Note
Do not place the center speaker farther away from the listening
position than the front speakers.
Specifying the speaker parameters
1
Press
?
/
1
to turn on the receiver.
2
Press SET UP.
3
Press the cursor buttons (
or
) to select the
parameter you want to adjust.
4
Turn the jog dial to select the setting you want.
The setting is stored automatically.
5
Repeat steps 3 and 4 until you have set all of the
parameters that follow.