Sony STR-DE875 Operating Instructions - Page 57

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 20,000 Hz; rated 110 watts (STR-DE975) and 100 watts (STR-DE875) per channel minimum RMS power, with no more than 0.09 % total harmonic distortion from 250 milliwatts to rated output (USA model only). Amplifier section Rated Power Output at Stereo mode (8 ohms 20 Hz - 20 kHz, THD 0.09%) STR-DE975: 110 W + 110W STR-DE875: 100 W + 100W Reference Power Output (8 ohms at 1 kHz, THD 0.7%) STR-DE975: Front1): 110 W/ch Center1): 110 W Surround1): 110 W/ch STR-DE875: Front1): 100 W/ch Center1): 100 W Surround1): 100 W/ch 1) Depending on the sound field settings and sources, there may be no sound output. Frequency response PHONO: RIAA equalization curve ±0.5 dB MULTI CH IN, CD/SACD, MD/DAT*, MD/TAPE**, DVD/LD, TV/SAT, VIDEO 1, VIDEO 2 VIDEO 3*: 10 Hz - 50 kHz +0.5/ -2 dB (with sound field and equalizer bypassed) Inputs (Analog) PHONO: Sensitivity: 4.0 mV Impedance: 50 kilohms S/Na): 86 dB (A, 4.0 mVb)) MULTI CH IN, CD/SACD, DVD/LD, MD/DAT*, MD/TAPE**, TV/SAT, VIDEO 1, VIDEO 2 VIDEO 3*: Sensitivity: 250 mV Impedance: 50 kilohms S/Na): 96 dB (A, 250 mVb)) a) Input short. b) Weighted network, input level. Inputs (Digital) DVD/LD (coaxial): Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) DVD/LD, TV/SAT, MD/DAT*, MD/TAPE** (Optical): Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs MD/DAT*, MD/TAPE** (OUT); VIDEO 1, VIDEO 2: (AUDIO OUT): Voltage: 250 mV, Impedance: 10 kilohms SUB WOOFER: Voltage: 2 V Impedance: 1 kilohms PHONES: Accepts low- and high-impedance headphones EQ BASS: 99 Hz~1.0 kHz (21 steps) MID: 198 Hz~10 kHz (37 steps) TREBLE: 1.0 kHz~10 kHz (23 steps) Gain levels: +6/-10 dB, 1dB step Sampling Frequency 48 kHz (TV/SAT, MD/DAT*, MD/TAPE** OPTICAL IN) 96 kHz (DVD/LD OPTICAL IN, COAXIAL IN) * STR-DE975 only ** STR-DE875 only Additional Information 57