Sony STR-DE875 Operating Instructions - Page 47

Preset Tuning For details on the buttons used in this section, see "Brief descriptions of buttons used to receive broadcasts" on page 45. Before tuning to preset stations, be sure to preset them by performing steps on "Presetting radio stations" below. Presetting radio stations 1 Rotate FUNCTION to select the tuner. The last received station is tuned in. 2 Tune in the station that you want to preset using Direct Tuning or Automatic Tuning (page 46). 3 Press MEMORY. "MEMORY" appears in the display for a few seconds. Do Steps 4 to 6 before "MEMORY" goes out. 4 Press SHIFT to select a memory page (A, B or C). Each time you press SHIFT, the letter "A", "B" or "C" appears in the display. 5 Select a preset number by pressing PRESET TUNING + or PRESET TUNING -. If "MEMORY" goes out before you press the preset number, start again from Step 3. 6 Press MEMORY again to store the station. If "MEMORY" goes out before you can store the station, start again from Step 3. 7 Repeat Steps 2 to 6 to preset another station. To change a preset number to another station Do Steps 1 to 6 to preset the new station to the number. Tuning to preset stations You can tune the preset stations either of the following two ways. Scanning the preset stations 1 Rotate FUNCTION to select the tuner. The last received stations is tuned in. 2 Press PRESET TUNING + or PRESET TUNING - repeatedly to select the preset station you want. Each time you press the button, the receiver tunes in one preset station at a time , in the corresponding order and direction as follows: nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N nC0˜...C2˜C1N Using the preset codes 1 Rotate FUNCTION to select the tuner. The last received stations is turned in. 2 Press SHIFT to select a memory page (A, B or C), then press the preset number of the station you want using the numeric buttons on the supplied remote. Receiving Broadcasts 47