Sony STRDG720 Operating Instructions
Sony STRDG720 - STR AV Receiver Manual
 |
UPC - 027242727472
View all Sony STRDG720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STRDG720 manual content summary:
- Sony STRDG720 | Operating Instructions - Page 1
3-283-372-11(1) Multi Channel AV Receiver Operating Instructions STR-DG720 ©2008 Sony Corporation - Sony STRDG720 | Operating Instructions - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modification not expressly approved in this manual - Sony STRDG720 | Operating Instructions - Page 3
About This Manual • The instructions in this manual are for model STR-DG720. Check your model number by looking at the lower right corner of the front panel. In this manual, models of area code U is used for illustration purposes unless stated otherwise. Any difference in operation is clearly - Sony STRDG720 | Operating Instructions - Page 4
for HDMI Using the Control for HDMI function for "BRAVIA" Sync 69 Preparing Control for HDMI function ........ 71 Watching a DVD (One-Touch Play 72 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control 73 Turning off the receiver with the TV (System Power Off - Sony STRDG720 | Operating Instructions - Page 5
AV IN VIDEO L AUDIO R MEMORY/ CATEGORY ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING qjqh qg qf qd qs qa q; 9 Name A ?/1 (on/standby) B SPEAKERS (OFF/A/B) C TUNING MODE TUNING +/- D Display E Remote sensor F DISPLAY Function Press to turn the receiver on or - Sony STRDG720 | Operating Instructions - Page 6
to select a sound field (page 51). MOVIE MUSIC M CATEGORY Used when listening to XM MODE Radio (page 61). CATEGORY +/- N MEMORY/ ENTER Press to store a station or enter the selection when selecting the settings (page 27, 59, 67). O VIDEO 2 IN/ Connects to a portable audio/ PORTABLE AV - Sony STRDG720 | Operating Instructions - Page 7
SB SBR ; PLIIx ;PL OPT DTS -ES 96/24 CAT HDMI COAX NEO:6 MEMORY D.RANGE ST MONO qh qg qf qd qs selection is set to "YES" (page 47) and the audio signal is output receiver is decoding Dolby Digital signals. "; D EX" lights up when the receiver set to "NO" (page 40) and you select a sound - Sony STRDG720 | Operating Instructions - Page 8
via an HDMI IN jack (page 20). Name P Playback channel indicators L R C SL SR S SBL SBR SB Function The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). Front Left - Sony STRDG720 | Operating Instructions - Page 9
DMPORT SAT IN DVD IN BD IN OUT HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR AUDIO AUDIO AUDIO AUDIO IN IN OUT IN AUDIO OUT PB/ CB PR/ CR COMPONENT VIDEO SURROUND BACK SURROUND R L R L CENTER FRONT B R L R SA-CD - Sony STRDG720 | Operating Instructions - Page 10
input image when you connect the MONITOR OUT or HDMI OUT jack to a TV or projector (page 17). Remote commander You can use the supplied RM-AAU021 Remote Commander to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 81). wa w; ql qk - Sony STRDG720 | Operating Instructions - Page 11
on or off. AV ?/1 (on/standby) Press to turn on or off the Sony audio/video components that the remote is assigned to operate (page 81). If you press ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes - Sony STRDG720 | Operating Instructions - Page 12
MENU (H), or MENU/HOME (N), press V, v, B or b to select the settings. Then, press to enter the selection if you have pressed DVD/BD MENU or MENU/HOME previously. Press also to enter the selection of the receiver, VCR, satellite tuner, CD player, DVD player or Bluray disc player Sony TV. 12US - Sony STRDG720 | Operating Instructions - Page 13
signal (TV input or video input). SLEEP Press to activate the Sleep Timer function and the duration which the receiver turns off automatically. a)The instructions supplied with the DIGITAL MEDIA PORT adapter. Notes • Some functions explained in this section may not work depending on the model - Sony STRDG720 | Operating Instructions - Page 14
1: Installing the speakers This receiver allows you to use a 7.1 channel system (7 speakers and one sub woofer). Enjoying a 5.1/7.1 channel system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a - Sony STRDG720 | Operating Instructions - Page 15
cords, be sure to disconnect the AC power cord (mains lead). H F C A A B SAT IN DVD IN BD IN OUT HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR AUDIO AUDIO AUDIO AUDIO IN IN OUT IN AUDIO OUT PB/ CB PR/ CR COMPONENT - Sony STRDG720 | Operating Instructions - Page 16
BACK L terminals. c)When you connect a sub woofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to a sub woofer, then - Sony STRDG720 | Operating Instructions - Page 17
power cord (mains lead). Audio signals TV Audio/video signals Video signals A B C DE TV OPTICAL IN ANTENNA AM SAT IN OPTICAL DVD IN COAXIAL DIGITAL (ASSIGNABLE) OUT IN IN DC5V 0.7A MAX L DMPORT SAT IN DVD IN BD IN OUT HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO - Sony STRDG720 | Operating Instructions - Page 18
to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will be transmitted. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. Tips • To output the sound of the TV from the - Sony STRDG720 | Operating Instructions - Page 19
components. HDMI Digital Y PB/CB PR/CR COMPONENT VIDEO VIDEO Analog High quality image Note Be sure to turn on the receiver when the video and audio signals of a playback component are being output to a TV via the receiver. Unless the power is turned on, neither video nor audio signals will - Sony STRDG720 | Operating Instructions - Page 20
Audio/video signals DVD player Audio/video signals HDMI features • A digital audio signal transmitted by HDMI can be output from the speakers connected to this receiver. This signal supports Dolby Digital, DTS, and Linear PCM. • The receiver supports xvYCC transmission. • This receiver supports - Sony STRDG720 | Operating Instructions - Page 21
OUT jacks or MONITOR OUT jacks. • When you want to listen to the sound from the TV speaker, set "AUDIO FOR HDMI" to "TV+AMP" in the VIDEO menu (page 39). If you cannot play back multi channel software, set to "AMP". However, the sound will not output from the TV speaker. • The multi/stereo area - Sony STRDG720 | Operating Instructions - Page 22
necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Note To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. Tip - Sony STRDG720 | Operating Instructions - Page 23
Satellite tuner/Set-top box Audio signals Video signals A B C D TV OPTICAL IN ANTENNA AM SAT IN OPTICAL DVD IN COAXIAL DIGITAL (ASSIGNABLE) OUT IN IN DC5V 0.7A MAX L DMPORT SAT IN DVD IN BD IN OUT HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO VIDEO VIDEO VIDEO IN - Sony STRDG720 | Operating Instructions - Page 24
DMPORT SAT IN DVD IN BD IN OUT HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR AUDIO AUDIO AUDIO AUDIO IN IN OUT IN AUDIO OUT PB/ CB PR/ CR COMPONENT VIDEO SURROUND BACK SURROUND R L R L CENTER FRONT B R L R SA-CD - Sony STRDG720 | Operating Instructions - Page 25
to change the factory setting of the VIDEO 1 input button on the remote so that you can use the button to control your DVD recorder. For details, see "Changing button assignments" (page 81). • You can also rename the VIDEO 1 input so that it can be displayed on the receiver's display. For details - Sony STRDG720 | Operating Instructions - Page 26
the antennas (aerials), be sure to disconnect the AC power cord (mains lead). FM wire antenna (aerial) HDMI SAT IN DVD IN VIDEO 1 IN MONITOR OUT XM Y VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR AUDIO AUDIO AUDIO AUDIO IN IN OUT IN AUDIO OUT PB/ CB PR/ CR COMPONENT VIDEO - Sony STRDG720 | Operating Instructions - Page 27
Started 6: Preparing the receiver and the remote Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the - Sony STRDG720 | Operating Instructions - Page 28
MIC PHONES TUNING MODE TUNING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME VIDEO 2 IN/PORTABLE AV IN VIDEO L AUDIO R MEMORY/ CATEGORY ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING Notes • Do not leave the remote in an extremely hot or humid place. • Do not use - Sony STRDG720 | Operating Instructions - Page 29
between each speaker and the receiver. • Adjusting the speaker level. • Measuring the distance of each speaker from your listening position. The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually according to your preference - Sony STRDG720 | Operating Instructions - Page 30
4 Measurement ends. "COMPLETE" appears on the display and the settings are registered. When you have finished Disconnect the optimizer microphone from • Auto Calibration cannot detect the sub woofer. Therefore, all sub woofer settings will be maintained. • If you have changed the position of the - Sony STRDG720 | Operating Instructions - Page 31
code t blank display t (warning code t blank display)b) t PUSH t blank display t ENTER b)Appears when there are more than one warning code. You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually - Sony STRDG720 | Operating Instructions - Page 32
settings manually 1 Record down the warning code. 2 Press . 3 Press ?/1 to turn off the receiver. 4 Follow the solution provided in the "Warning codes and solutions" below. 5 Turn on the receiver and perform Auto Calibration again (page 30). Warning codes and solutions Warning code Explanation - Sony STRDG720 | Operating Instructions - Page 33
test tone from your listening position. Tip The receiver employs a test tone with a frequency centered set to "SINGLE". 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds problem. Note The test tone does not work when ANALOG DIRECT is selected. - Sony STRDG720 | Operating Instructions - Page 34
to the TV jack SA-CD/CD [SA-CD/CD/ CD-R]* Super Audio CD/CD player/CD recorder, etc., connected to the SA-CD/ CD/CD VIDEO 2" and "SA-CD/CD" appear respectively. 2 Turn on the component and start playback. 3 Press MASTER VOL +/- to adjust the volume. You can also use MASTER VOLUME on the receiver - Sony STRDG720 | Operating Instructions - Page 35
MOVIE MUSIC ANALOG DIRECT MUTING 5 3 Notes • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with the Super Audio CD player or CD player. Tip You can select the sound field to suit the music. Refer to page 53 for details. Recommended - Sony STRDG720 | Operating Instructions - Page 36
to the operating instructions supplied with the TV and DVD player/Blu-ray disc player. • Check the following if you cannot listen to multi channel sound. - Be sure this receiver is connected to the DVD player/ Blu-ray disc player via a digital connection. - Be sure the digital audio output of the - Sony STRDG720 | Operating Instructions - Page 37
amplifier menus, you can make various adjustments to customize the receiver. 2-6 THEATER 123 DVD/BD MENU 456 AUTO CAL D.TUNING b to enter the parameter. 6 Press V/v repeatedly to select the setting you want. The setting is entered automatically. To return to the previous display Press B. To - Sony STRDG720 | Operating Instructions - Page 38
. OFF, COMP. STD, COMP. MAX COMP. OFF EQ OFF, EQ ON EQ OFF BASS -6 dB to BASS +6 dB (1 dB step) BASS 0 dB TRE -6 dB to TRE +6 dB (1 dB step) TRE 0 dB For details, see "Enjoying Surround Sound" (page 51). A.F.D. AUTO for: VIDEO 1, 2, BD, DVD, SAT; 2CH ST. for: TV, SA-CD/CD, TUNER, DMPORT SB - Sony STRDG720 | Operating Instructions - Page 39
Menu [Display] TUNER [4-TUNER] (page 44) AUDIO [5-AUDIO] (page 45) VIDEO [6-VIDEO] (page 46) Parameters [Display] FM station receiving modea) [FM MODE] Naming preset stationsa) [NAME IN] XM Antenna Aiminga)e) [XM ANT] Settings FM AUTO, FM MONO Initial setting FM AUTO For details, see "Naming - Sony STRDG720 | Operating Instructions - Page 40
page 47) Parameters [Display] Settings Sub woofera) [SW SPK DIST. 3 ft. to DIST. 23 ft. [SL DIST.] (1 ft. step) Initial setting YES LARGE LARGE LARGE DUAL DIST. 10 ft. DIST. 10 ft. DIST. 10 ft. are set to "DUAL". d)"AUDIO FOR HDMI" and "CONTROL FOR HDMI" scroll across the display, then "AUDIO" - Sony STRDG720 | Operating Instructions - Page 41
Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select "1-LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 37) and "Overview - Sony STRDG720 | Operating Instructions - Page 42
speaker bass level) x TRE LVL (Front speaker treble level) Notes • This function does not work for signals with a sampling frequency of more than 48 kHz. • If you adjust the equalizer during DTS 96/24 signal reception, the signal will be output only at 48 kHz. Settings for the surround sound (SUR - Sony STRDG720 | Operating Instructions - Page 43
Matrix, DTS-ES Discrete 6.1, etc., format, you can enjoy the surround sound intended by the filmmakers. Select the surround back decoding mode using "SB DEC that includes a Surround EX flag. The Dolby Corporation web page can help you distinguish Surround EX films. c)Software encoded with a flag to - Sony STRDG720 | Operating Instructions - Page 44
be no sound from the Logic IIx is selected. Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode and to name you set the name of preset stations. For details, see "Naming preset stations" (page 60). x XM ANT (XM Antenna Aiming) This parameter helps you - Sony STRDG720 | Operating Instructions - Page 45
connected player. When signals in any other format are received, set this item to "DEC. AUTO". • DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. Note When set to "DEC. AUTO" and the sound from the digital audio jacks (for a CD, etc.) is interrupted when playback - Sony STRDG720 | Operating Instructions - Page 46
" (page 37) and "Overview of the menus" (page 38). VIDEO menu parameters x AUDIO FOR HDMI (Audio for HDMI) Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection. • AMP The HDMI audio signals from the playback component is only output to - Sony STRDG720 | Operating Instructions - Page 47
distorted, or you feel a lack of surround effects when using multi channel surround sound, select "SMALL" to activate the bass redirection circuitry and output the center channel bass frequencies from the front speakers (if set to "LARGE") or sub woofer. • LARGE If you connect a large speaker that - Sony STRDG720 | Operating Instructions - Page 48
of 7.1 channel. Tip The "LARGE" and "SMALL" settings for each speaker determine whether the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other - Sony STRDG720 | Operating Instructions - Page 49
better surround sound. Give it a try! x SUR POS. (Surround speaker position) Lets you specify the location of your surround speakers for proper implementation of the surround effects in the CINEMA STUDIO EX modes (page 52). This setup item is not available when the surround speakers are set to "NO - Sony STRDG720 | Operating Instructions - Page 50
front speakers. If you are not sure which sounds best, select "BEHD/LO" or "BEHD/HI" and then use the speaker distance parameter and speaker level adjustments to obtain proper balance. x CRS. FREQ (Speaker crossover frequency) Lets you set the bass crossover frequency of the speakers that have been - Sony STRDG720 | Operating Instructions - Page 51
(AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER A.F.D. 2CH A.F.D. MOVIE MUSIC THEATER 123 DVD/BD - Sony STRDG720 | Operating Instructions - Page 52
AUTO] Multi channel audio after decoding (Detecting the sound as it was recorded/encoded without adding any surround effects. However, this receiver will sound in 5.1 channel for watching videos of overdubbed or old movies. Performs Dolby Pro Logic II Music mode decoding. This setting - Sony STRDG720 | Operating Instructions - Page 53
Dolby Pro Logic IIx, multi channel sound (being encoded) is output. Selecting a preprogrammed sound field You can take advantage of surround sound simply by selecting one of the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls - Sony STRDG720 | Operating Instructions - Page 54
CINEMA STUDIO EX B DCS[C.ST.EX B] Reproduces the sound characteristics of the Sony Pictures Entertainment "Kim Novak Theater" cinema production studio. of sports broadcasting. PORTABLE AUDIO Reproduces a clear enhanced sound image from your portable ENHANCER [PORTABLE] audio device. This mode is - Sony STRDG720 | Operating Instructions - Page 55
input. - the multi channel Linear PCM signals are received via an HDMI IN jack. • When one of the sound fields for music is selected, no sound is output from the sub woofer if all the speakers are set to "LARGE" on the SYSTEM menu. However, the sound will be output from the sub woofer if - the - Sony STRDG720 | Operating Instructions - Page 56
VIDEO 2 IN/PORTABLE AV IN VIDEO L AUDIO R MEMORY/ CATEGORY ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING 2 1 Press ?/1 to turn off the power. 2 While holding down 2CH, press ?/1. "S.F. CLR." appears on the display and all sound fields are reset to their initial setting - Sony STRDG720 | Operating Instructions - Page 57
on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "AUTO T.". 3 Turn TUNING + or TUNING -. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display, select monaural audio so that the sound will be - Sony STRDG720 | Operating Instructions - Page 58
optimum reception. 4 Press ENTER. You can also use MEMORY/ENTER on the receiver. If you cannot tune in a station Make sure you have entered the right select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune in the station that you want to preset using Automatic Tuning (page - Sony STRDG720 | Operating Instructions - Page 59
number. If "MEMORY" goes out before you select the preset number, start again from step 3. 5 Press ENTER. You can also use MEMORY/ENTER on the receiver. The station is stored as the selected preset number. If "MEMORY" goes out before you press ENTER, start again from step 3. 6 Repeat steps 1 to 5 to - Sony STRDG720 | Operating Instructions - Page 60
VOL MASTER VOL O RETURN/EXIT MENU/HOME 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune in the preset station you want to create an index name for (page 59). 3 Press AMP MENU. "1-LEVEL" appears on the display. 4 Press - Sony STRDG720 | Operating Instructions - Page 61
are the property of their respective owners. XM READY® SUBSCRIPTIONS FOR U.S. home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM letters "I", "O", "S" or "F". Activate your XM Satellite Radio service in the U.S. online at http:// activate.xmradio.com or - Sony STRDG720 | Operating Instructions - Page 62
OPTICAL IN SAT IN OPTICAL DVD IN COAXIAL DIGITAL (ASSIGNABLE) ANTENNA AM SAT IN XM DVD IN BD IN HDMI SAT IN VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR C OUT IN DC5V 0.7A MAX L DMPORT AUDIO AUDIO AUDIO AUDIO AUDIO IN IN IN OUT IN OUT R SA-CD/CD/CD-R TV SAT DVD - Sony STRDG720 | Operating Instructions - Page 63
FM MODE X x 1 Press TUNER repeatedly to select "XM RADIO". You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING - to select channel 0. You can also press TUNING MODE on the receiver to select "AUTO T.", and then turn TUNING + or TUNING - to select channel 0. 3 Check the XM - Sony STRDG720 | Operating Instructions - Page 64
M 2 TV FM MODE X x 1 Press TUNER repeatedly to select "XM RADIO". You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING - to select a channel. You can also press TUNING MODE on the receiver to select "AUTO T.", and then turn TUNING + or TUNING - to select a channel. 64US - Sony STRDG720 | Operating Instructions - Page 65
a channel from one category. "CAT" is displayed on the display when you set to "ONE CAT" mode. 3 Press CATEGORY + or CATEGORY - to select + or TUNING - to select the channel. You can also press TUNING MODE on the receiver to select "AUTO T.", and then turn TUNING + or TUNING - to select a channel. - Sony STRDG720 | Operating Instructions - Page 66
TUNING MODE TUNING DISPLAY INPUT MODE INPUT SELECTOR MASTER VOLUME VIDEO 2 IN/PORTABLE AV IN VIDEO L AUDIO R MEMORY/ CATEGORY ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC ANALOG DIRECT MUTING Press DISPLAY on the receiver repeatedly. Each time you press DISPLAY while tuning in the - Sony STRDG720 | Operating Instructions - Page 67
- on the receiver. Preset numbers from 1 to 30 are receiver. 5 Press ENTER. You can also use MEMORY/ENTER on the receiver. You can also use INPUT SELECTOR on the receiver. 2 Press PRESET + or PRESET - repeatedly also press TUNING MODE on the receiver to select "PRESET T.", and then - Sony STRDG720 | Operating Instructions - Page 68
blocked or cannot be received with your XM subscription package. Consult the latest channel guide at www.xmradio.com of the satellites may be blocked Refer to the instructions supplied with the XM Mini-Tuner or the antenna when the signal is strong. If audio or program information you often see - Sony STRDG720 | Operating Instructions - Page 69
sound from the TV speaker or the speakers connected to the receiver. • System Power Off: When you turn off the TV, the receiver and connected components are also turned off simultaneously. Control for HDMI is a mutual control function standard used by HDMI CEC (Consumer Electronics Control) for HDMI - Sony STRDG720 | Operating Instructions - Page 70
channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack of the TV to the OPTICAL IN jack of the receiver. Satellite tuner/Set-top box Audio/video signals DVD player Audio/video signals Blu-ray disc player Audio/video signals A A A TV - Sony STRDG720 | Operating Instructions - Page 71
the TV. If your TV does not support the Control for HDMI-Easy Setting function, do the following procedures. For details on setting the TV and connected components, refer to the operating instructions of the respective components. 1 Make sure that the receiver is connected to the TV and components - Sony STRDG720 | Operating Instructions - Page 72
set Control for HDMI to select "6-VIDEO". 3 Press or b to enter the menu. 4 Press V/v repeatedly to select "CONTROL FOR HDMI". "CONTROL FOR HDMI" scrolls HDMI function is activated. Watching a DVD (One-Touch Play) You can enjoy sound and image from the components connected to the receiver via HDMI - Sony STRDG720 | Operating Instructions - Page 73
the receiver's volume when you adjust the TV volume. Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV. • When "CONTROL FOR HDMI" is set to "CTRL ON", the "AUDIO FOR HDMI" settings in the VIDEO menu will set automatically - Sony STRDG720 | Operating Instructions - Page 74
using the POWER button on the TV's remote, the receiver and the connected components turn off automatically. You can also use the receiver's remote to turn Notes • Set the TV Standby Synchro to "ON" before using the System Power Off function. For details, refer to the operating instructions of the - Sony STRDG720 | Operating Instructions - Page 75
. You can also use the input buttons on the remote. 2 Press INPUT MODE repeatedly on the receiver to select the audio input mode. The selected audio input mode appears on the display. Audio input modes • AUTO Gives priority to digital audio signals when there are both digital and analog connections - Sony STRDG720 | Operating Instructions - Page 76
image from a network system such as a portable audio/video source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound and image from the connected component on the receiver. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT - Sony STRDG720 | Operating Instructions - Page 77
DMPORT jack on the receiver. DIGITAL MEDIA PORT adapter TV OPTICAL IN SAT IN OPTICAL DVD IN COAXIAL DIGITAL (ASSIGNABLE) ANTENNA AM SAT IN XM DVD IN B HD VIDEO VIDEO VIDEO VIDEO VIDEO IN IN OUT IN OUT MONITOR OUT IN DC5V 0.7A MAX L DMPORT AUDIO AUDIO AUDIO AUDIO AUDIO IN IN IN - Sony STRDG720 | Operating Instructions - Page 78
. The sound is played back on the receiver and the image appears on the TV. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT adapter. Notes • Depending on the type of DIGITAL MEDIA PORT adapter, you can operate the connected component by using the remote. For - Sony STRDG720 | Operating Instructions - Page 79
input* t Selected input t Sound field currently applied FM and AM band Preset station name* t Frequency t Sound field currently applied XM Radio Channel the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you - Sony STRDG720 | Operating Instructions - Page 80
receiver You can record from an audio/video component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a CD-R You can record onto a CD-R using the receiver. Refer to the operating instructions component. Note Sound adjustments do not - Sony STRDG720 | Operating Instructions - Page 81
to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to Sony VCRs are operated with a VTR 2 or VTR 3 setting which corresponds to 8 mm and VHS respectively. b)Sony DVD recorders are operated with a DVD1 or DVD3 setting. For details, refer to the operating instructions - Sony STRDG720 | Operating Instructions - Page 82
coded green, blue and red. x Composite video A standard format for transmitting video signal information. The luminance signal Y and chrominance signal C are combined and transmitted together. x Digital Cinema Sound (DCS) A unique sound reproduction technology for home theater developed by Sony - Sony STRDG720 | Operating Instructions - Page 83
digital picture and sound. The HDMI specification supports HDCP (High-bandwidth Digital Contents Protection), a copy protection technology that incorporates coding technology for digital video signals. x PCM (Pulse Code Modulation) A method of converting analog audio to digital audio for easy - Sony STRDG720 | Operating Instructions - Page 84
outlet, contact your dealer. • The AC power cord (mains lead) must be changed only at a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a If you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. 84US - Sony STRDG720 | Operating Instructions - Page 85
If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are connected - Sony STRDG720 | Operating Instructions - Page 86
and/or component device to make sure it supports this receiver. Video There is no picture or an unclear picture appears on the TV screen. • Select the appropriate input using the input buttons. • Set your TV to the appropriate input mode. • Move your audio components away from the TV. • Depending on - Sony STRDG720 | Operating Instructions - Page 87
instructions of the connected component. • If you change the HDMI connection, connect/disconnect the AC power cord, or there is a power failure, repeat the procedures of "Preparing Control for HDMI function" (page 71). No sound is output from the receiver and TV speaker while using the System Audio - Sony STRDG720 | Operating Instructions - Page 88
tuning). Use direct tuning. • Make sure you set the tuning interval correctly (when tuning in AM codes" (page 31) to solve the problem. PROTECT Irregular current is output to the speakers. The receiver will automatically turn off after a few seconds. Check the speaker connection and turn on the power - Sony STRDG720 | Operating Instructions - Page 89
may be retained. Reference sections for clearing the receiver's memory To clear All memorized settings Customized sound fields See page 27 page 56 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 8 ohm loads, both channels - Sony STRDG720 | Operating Instructions - Page 90
Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 0.7 A MAX Power consumption Area code Power consumption U 250 W CA 340 VA Power consumption (during standby mode) 0.3 W (when "CONTROL FOR HDMI" in VIDEO menu is set - Sony STRDG720 | Operating Instructions - Page 91
A. CAL 50 AUDIO 45 EQ 42 LEVEL 41 SUR 42 SYSTEM 47 TUNER 44 VIDEO 46 Muting 34 N Naming 60, 78 O One-Touch Play 72 R Recording onto a CD-R 80 onto a recording media 80 Remote commander 10 S Satellite tuner connecting 23 SB DEC 43 Selecting component 34 sound field 53 speaker system 28 Set-top box - Sony STRDG720 | Operating Instructions - Page 92
(1) Sony Corporation Printed in Malaysia
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
 |
 |
©2008 Sony Corporation
3-283-372-
11
(1)
Multi Channel AV
Receiver
Operating Instructions
STR-DG720