Sony STRDG720 Operating Instructions - Page 90

Inputs Analog Digital (Coaxial) Digital (Optical) Outputs (Analog) AUDIO OUT SUB WOOFER Equalizer Gain levels Sensitivity: 500 mV/ 50 kohms S/N3): 96 dB (A, 500 mV4)) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) S/N: 100 dB (A, 20 kHz LPF) Voltage: 500 mV/10 kohms Voltage: 2 V/1 kohm ±6 dB, 1 dB step 3)INPUT SHORT (with sound field and equalizer bypassed). 4)Weighted network, input level. FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Area code Tuning scale 10 kHz step 9 kHz step U, CA 530 - 531 - 1,710 kHz5) 1,710 kHz5) Antenna Loop antenna Intermediate frequency 450 kHz 5)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. 90US Video section Inputs/Outputs Video: 1 Vp-p/75 ohms COMPONENT VIDEO: Y: 1 Vp-p/75 ohms PB/CB: 0.7 Vp-p/75 ohms PR/CR: 0.7 Vp-p/75 ohms 80 MHz HD Pass Through General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power output (DIGITAL MEDIA PORT) DC OUT: 5 V, 0.7 A MAX Power consumption Area code Power consumption U 250 W CA 340 VA Power consumption (during standby mode) 0.3 W (when "CONTROL FOR HDMI" in VIDEO menu is set to "CTRL OFF") Dimensions (w/h/d) (Approx.) 17 × 6 1/4 × 12 5/8 inches (430 × 157.5 × 318 mm) including projecting parts and controls Mass (Approx.) 18 lb 2 oz (8.2 kg) Supplied accessories Operating instructions (this manual) Quick Setup Guide (1) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) RM-AAU021 Remote Commander (1) R6 (size-AA) batteries (2) Optimizer microphone (ECM-AC2 or ECM-AC2a) (1) For details on the area code of the component you are using, see page 3. Design and specifications are subject to change without notice.