Sony STRDG720 Operating Instructions - Page 33
: Adjusting the speaker levels and balance (TEST TONE), TEST TONE - problem
UPC - 027242727472
View all Sony STRDG720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Getting Started 9: Adjusting the speaker levels and balance (TEST TONE) You can adjust the speaker levels and balance while listening to the test tone from your listening position. Tip The receiver employs a test tone with a frequency centered at 800 Hz. 2-5 TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER Input buttons 2CH A.F.D. MOVIE MUSIC 1 4 7 >10 CLEAR DISPLAY THEATER 23 DVD/BD MENU 56 AUTO CAL D.TUNING 89 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL O RETURN/EXIT MENU/HOME 1 MASTER VOL +/- 1 Press AMP MENU. "1-LEVEL" appears on the display. 2 Press menu. or b to enter the 3 Press V/v repeatedly to select "T. TONE". 4 Press or b to enter the parameter. 5 Press V/v repeatedly to select "T. TONE Y". The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround back right* t Surround back left* t Surround left t Sub woofer * You will only hear the test tone from the - surround back left and right speakers when surround back speakers are set to "DUAL". - surround back left speaker when surround back speakers are set to "SINGLE". 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker. For details, see "Adjusting the level (LEVEL menu)" (page 41). Tips • To adjust the level of all speakers at the same time, press MASTER VOL +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the display during adjustment. 7 Repeat steps 1 to 5 to select "T. TONE N". You can also press any input buttons. The test tone turns off. When a test tone is not output from the speakers • The speaker cords may not be connected securely. • The speaker cords may have the short-circuit problem. Note The test tone does not work when ANALOG DIRECT is selected. 33US