Sony XAV-9000ES Operating Instructions - Page 14
Installation, Using a USB device, Mounting the unit in a Japanese car, Fuse replacement
View all Sony XAV-9000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using a USB device Installation of the USB Type-C extension cable is required before use. 1 Connect the USB Type-C extension cable to the USB port. Installation Mounting the unit in a Japanese car You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Example to dashboard/center console 2 Tighten the screw firmly on the USB cable holder to secure the USB Type-C extension cable . Bracket Bracket Existing parts supplied with your car When mounting this unit to the preinstalled brackets of your car, use the mounting screws in the appropriate screw holes based on your car: T for TOYOTA and N for NISSAN. 3 Connect the installed USB Type-C extension cable to a USB device. 4 Press HOME, then touch [USB]. Note To prevent malfunction, install only with the mounting screws . Fuse replacement When replacing the fuse, be sure to Fuse (10 A) use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. 14EN