Sony XAV-AX150 Operating Instructions - Page 22
Radio reception, Picture, Sound, USB playback, BLUETOOTH function
View all Sony XAV-AX150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Radio reception The radio reception is poor. Static noise occurs. Connect the antenna (aerial) firmly. RDS PTY displays [PTY not found.]. The current station is not an RDS station, or the radio reception is poor. Picture There is no picture/picture noise occurs. A connection has not been made correctly. Check the connection between this unit and other equipment and set the input selector of the equipment to the source corresponding to this unit. Installation is not correct. - Install the unit at an angle of less than 30° in a sturdy part of the car. The parking cord (light green) is not connected to the parking brake switch cord, or the parking brake is not applied. The picture does not fit in the screen. The aspect ratio is fixed on the playback source. Sound There is no sound/sound skips/sound cracks. A connection has not been made correctly. Check the connection between this unit and the connected equipment and set the input selector of the equipment to the source corresponding to this unit. Installation is not correct. - Install the unit at an angle of less than 30° in a sturdy part of the car. The unit is in pause/reverse/fast-forward mode. The settings for the outputs are not made correctly. The volume is too low. The ATT function is activated. The format is not supported. - Check if the format is supported by this unit (page 19). Sound is noisy. Keep cords and cables away from each other. USB playback Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with a complicated tree structure. Audio files cannot be played. USB devices formatted with file systems other than FAT12, FAT16, FAT32 or exFAT are unsupported.* * This unit supports FAT12, FAT16, FAT32 and exFAT, but some USB device may not support all of these. For details, refer to the operating instructions of each USB device or contact the manufacturer. BLUETOOTH function The other BLUETOOTH device cannot detect this unit. Set [Bluetooth Connection] to [ON] (page 17). While connecting to a BLUETOOTH device, this unit cannot be detected by another device. Terminate the current connection and search for this unit from the other device. Depending on your smartphone or cellular phone, you may need to delete this unit from the history of the connected smartphone or cellular phone then pair them again (page 9). Connection is not possible. Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone. Raise the volume while receiving a call. The talker's voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the [MIC Gain] level (page 14). Echo or noise occurs during call conversations. Reduce the volume. Set [Speech Quality] to [Mode 1] or [Mode 2]. (page 14). If ambient noise other than the phone call sound is loud, try reducing this noise. - Shut the window if road noise is loud. - Lower the air conditioner if the air conditioner is loud. 22GB