Symphonic WF803 Owner's Manual - Page 15

CONNECTING TO A RECEIVER WITH DOLBY DIGITAL DECODER If using this DVD/VCR COMBINATION UNIT to play a DVD disc in 5.1 channel Dolby Digital surround, the DVD/VCR COMBINATION UNIT outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR COMBINATION UNIT up to a Dolby Digital receiver, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as heard in movie theaters. Use an audio coaxial digital cable (commercially available) for the audio connections. Front speaker (left) Center speaker DVD/VCR AUDIO OUT VCR ANT-IN L R ANT-OUT VIDEO OUT AUDIO IN VIDEO IN Front speaker (right) DVD S-VIDEO COMPONENT AUDIO OUT VIDEO OUT OUT Y DIGITAL AUDIO OUT Cb L COAXIAL Cr R To COAXIAL DIGITAL AUDIO OUT jack Receiver with Dolby Digital Decoder Surround speaker (left) To COAXIAL DIGITAL AUDIO INPUT jack Surround speaker (right) Subwoofer [Fig. 5] ¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to ON for audio output in the setup mode. ¡Unless connected to a Dolby Digital receiver, set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. CONNECTING TO AN ANALOG AUDIO SYSTEM DVD/VCR AUDIO OUT VCR ANT-IN L DVD S-VIDEO COMPONENT AUDIO OUT VIDEO OUT OUT Y DIGITAL AUDIO OUT R ANT-OUT VIDEO OUT AUDIO IN VIDEO IN Cb L COAXIAL Cr R Stereo system To Right (red) and Left (white) AUDIO INPUT jacks or To ANALOG AUDIO INPUT jacks Notes To Right (red) and Left (white) ANALOG AUDIO OUT jacks [Fig. 6] ¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR COMBINATION UNIT. - 15 - EN 1L25