TEAC CRH500NT Owners Manual - Page 54

Troubleshooting (2) CD Player Will not play. e Load a disc with label side up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Depending on the disc, etc. it may not be possible to play back CD-R/RW discs. Try again with another disc. e You cannot play back unfinalized CD-R/RW discs. Finalize such a disc in a CD recorder and try again. Sound skips. e Place the unit on a stable place to avoid vibration and shock. e If the disc is dirty, clean the surface of the disc. e Do not use scratched, damaged or warped discs. Maintenance If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Restoring factory settings If the power supply is interrupted for 14 days or longer, all the settings kept in memory (such as preset stations and timer settings) will be erased. It will take more than 3 days after plugging the power cord into the outlet to charge enough electricity for the memory backup function. iPod Player Will not play. e Remove the iPod from the USB jack, wait a few seconds, and insert it again. e Software update may solve the problem. Visit the Apple website and download the latest iPod software. If you want to manually initialize the settings, hold down the SOURCE button and play/pause button (y/J) for more than 4 seconds in standby mode. Cannot operate the iPod. e Make sure the HOLD switch of the iPod is not set to HOLD. MP3/WMA There is no sound even if the play/pause button (y/J) is pressed. e Check if there are MP3 or WMA files on the USB. e Non-playable file formats (e.g MPEG 1 LAYER 2 file) cannot be played. "No title", "No artist", and "No album" appears on the display. e There is no ID3 tag information for the music file. Edit the title, artist, and album information of the song on a PC using the MP3 or WMA making application. The unit will be turned on, and all the settings are reset to the default settings. Some unknown characters are displayed on the display panel. e This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc.) correctly. File name of MP3 or WMA should be alphanumeric characters. If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again. 54 EN_CR-H500NT_T_C.indb 54 09.10.6 5:31:48 PM