TEAC DM-4800 DM-4800 Owner's Manual - Page 112
MIDI faders, MIDI Mixer, The MIDI Control Change messages trans
View all TEAC DM-4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
8 - Remote operation : MIDI Control by the DM-4800 MIDI faders In this mode, the first 16 faders are used to transmit a defined Control Change message when the REMOTE fader layer mode is selected and the MIDI FADERS screen is displayed, or was the last external control screen displayed. 1 Select the MIDI FADERs option from the external control screen (Figure 8.3, External Control). 2 Set the Control Change message using the CONTROL setup screen (below at Figure 8.5, MIDI Faders setup screen) or in the ID field of the EXT. CTRL screen: MIDI Mixer This allows you to use the 24 faders, the MUTE keys, and the encoders (as pan controls) on the 16 different MIDI channels of a device connected to the MIDI OUT port. This may be used for older DAWs, or for plug-in control where HUI or Mackie Control emulation is not appropriate. The REMOTE fader layer must be selected and the MIDI MIXER screen must be displayed or be the last external control displayed. Figure 8.5: MIDI Faders setup screen 3 Use the wheel to select the control change number (the "translation" of this number appears automatically underneath the number). The MIDI Control Change messages transmitted by the fader are sent on the MIDI channel corresponding to the fader number. Faders 17 through 24 are not used here. 1 Select the MIDI Mixer option from the external control screen (Figure 8.3, External Control). Figure 8.6: MIDI Mixer screen 112 TASCAM DM-4800 User's Manual