TEAC DP-24 DP-24 Owner's Manual - Page 12
Quick Guide, Playback and mixing, Preparation
View all TEAC DP-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 - Quick Guide Playback and mixing In this section, we will play back the demo song on the included SD card. When this unit is purchased new, the SD card with the demo song on it is already installed in the unit, but we will start by explaining how to insert an SD card using the procedures below. Preparation 1. Insert the included SD card into the SD card slot on the rear panel. Be careful not to forcibly insert the card in the wrong direction. Doing so could damage the SD card slot or the SD card. CAUTION Never use any AC adapter or power cord other than the supplied TASCAM PS-1225L AC adapter and AC adapter power cord. Use of a different adapter could cause malfunction, fire or electric shock. 3. Connect headphones to the PHONES jack on the front panel. Headphones 2. Connect the supplied AC adapter (TASCAM PS1225L) to the DC IN 12V jack on the rear panel. 4. Press and hold the STANDBY/ON button for a few seconds on the rear panel to turn the power ON. When the unit starts, the Home screen appears on the display. 5"4$". 14- AC outlet DC plug The bottom panel has a hook (cord holder) that can be used to hold the AC adapter cord in place. When using it, wrap the cord around this cord holder to prevent it from being disconnected during use. Start-up screen Home screen CAUTION •• Do not remove or insert an SD card when the power is ON. Always turn the power OFF (standby) before removing or inserting an SD card. 12 TASCAM DP-24