TEAC DP-24 DP-24 Owner's Manual - Page 64
Using Built-In Effects, Dynamic effects, Inserting a dynamic effect, Guitar effects
View all TEAC DP-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
9 - Using Built-In Effects This chapter explains the dynamic effects, guitar effects, and send effects that can be applied to individual mic and guitar inputs. You can select one of the four types of dynamic effects (COMPRESSOR, NOISE SUPPRESSOR, DE-ESSER, EXCITER) to apply to all inputs (INPUT A to H). For details about the editing parameters for each type of effect, see "18 - Appendix" (page 102). The library data can also be used for other songs. Even when the parameters are not stored in the library data, the effect assignments and parameters are always stored as part of a song. Dynamic effects When you press the DYNAMICS button, the effect inserted in the last selected input (INPUT A to H) is displayed. You can select one of the four types of effects (COMPRESSOR, NOISE SUPPRESSOR, DE-ESSER, EXCITER) and apply it to all inputs (INPUT A to H) (though the simultaneous application has some limitations). You cannot use multiple types of effects simultaneously. CAUTION When using a guitar effect together with a dynamic effect, the dynamic effect can be only inserted into a maximum of 2 channels. The selected input is displayed on the screen. (INPUT A to H) The on/off state is also displayed on the screen. Inserting a dynamic effect Press the DYNAMICS button to open the DYNAMICS screen. Press the SOURCE button to select the input (INPUT A to H) into which you want to insert the dynamic effect. Press the F3 (SELECT) button to select the effect that you want to insert. Press the F4 (ON/OFF) button to set the selected effect to ON and insert it. You can also align the cursor with INSERT EFFECT on the Mixer screen and use the JOG/DATA dial to turn the effect on/off. Editing a dynamic effect You can edit the parameters of the selected dynamic effect. The editing parameters differ depending on the effect type. 64 TASCAM DP-24 Use the CURSOR (5 /b/g/t) buttons to select the parameter that you want to change, and then use the JOG/DATA dial to select the value. NOTE There is no preset or storage functions available. Guitar effects This unit has multi-effects for guitar. You can insert these effects into the tracks for use. Inserting a guitar effect Press the EFFECT button to open the GUITAR EFFECT/SEND EFFECT screen (the last displayed effect appears). When the SEND EFFECT screen is displayed, press the F1 (GUITAR) button to open the GUITAR EFFECT screen. If there is any effect already inserted in a track, the SELECT button is lit and the track number appears on the upper right corner of the screen. If there is no effect inserted, the SELECT button is unlit, and TRACK -- appears on the upper right corner of the screen. Press the SELECT button of the track which you want to insert the effect into, and the effect will be inserted. You can also align the cursor with INSERT EFFECT on the Mixer screen and use the JOG/DATA dial to turn the effect on/off. CAUTION Guitar effects can be also inserted into stereo tracks. When inserting into a stereo track, though the stereo effect can be achieved depending on the effect used, since the input is monaural and the output is monaural/stereo, observe the following precautions. •• Since the effect input is monaural, when it is inserted into a stereo track, the odd numbered track input becomes active. Therefore, if you want to achieve the stereo effect when recording a stereo track inserted with an effect, set the input assignment to monaural. Example: assigning H/H to 13/14 tracks