TEAC DR-H358i Owners Manual - Page 20

Basic Operation 2 3 3 Play the source, and adjust the volume using the VOLUME knob. 1 1 Press the STANDBY/ON button to turn the unit on. < The unit turns on with the source that was last selected. < You can also use the SOURCE button (or the TUNER, DISC, iPod/ USB or AUX button on the remote control unit) to turn the unit on. The volume is adjustable from MIN to MAX. You can hold down the VOLUME - or + buttons on the remote control unit to reduce or bring up the volume continuously. < Press the STANDBY/ON button to put the unit in the standby mode when it is not being used. < If you press the STANDBY/ON button to put the unit in the standby mode when SOURCE is set for AUX1 or AUX2, first, the speaker sound stops and then after about 2 seconds the output to the sub woofer stops. 2 Press the SOURCE button (or the TUNER, DISC, iPod/USB or AUX button on the remote control unit) to select a source. Recording a Source You can record a source onto a CD or a cassette tape connected to the DIGITAL OUT terminal or the LINE OUT jacks. 1. Select a source to be recorded by pressing the SOURCE button. 2. Start recording. The selected source is shown on the front panel's display. Each time the SOURCE button is pressed, the source changes as follows: FM Radio DAB Radio AUX1 Source AUX2 Source iPod DISC Source USB Source < The volume, and tone control (DVS, LOUDNESS and TONE) have no effect on the recording signals. Dimmer < You can also select FM or DAB by pressing the TUNER button on the remote control unit once or twice. < You can also select iPod or USB by pressing the iPod/USB button on the remote control unit once or twice. Press the DIMMER button to dim the display. Press the button again to cancel the dimmer function. < To listen to an external source connected to the AUX IN jack, select AUX1 or AUX2. < You can also select AUX1 or AUX2 by pressing the AUX button on the remote control unit once or twice. 20