TEAC DR-H358i Owners Manual - Page 37

Settings (General Setup) TV DISPLAY The shape of the television or monitor may not match the shape of the movie frame. To avoid distortion on older televisions, you may need to change the way in which the image is displayed. Televisions use a 4:3 aspect ratio; high-definition televisions use 16:9 aspect ratio (as do movies). Note: You may need to read your television's manual in conjunction with this section in order to achieve the best results. Some discs do not allow the aspect ratio to be changed and you will therefore have to change the aspect ratio on the TV. OSD (On Screen Display) LANGUAGE Select the desired language for onscreen menus of DR-H358i from the following: ENGLISH (default) FRANÇAIS DEUTSCH ITALIANO ESPAÑOL NEDERLANDS Make this setting while playback is stopped; you cannot do this while playing back a disc. SCREEN SAVER 4:3 PAN SCAN This mode is used with 4:3 televisions. 4:3 images are displayed normally. When showing 16:9 programmes, the full height of the screen is displayed, and the left and right part of the image are cut off. ON (Default) The screen saver starts up if nothing is played back and no operations are performed for 4 minutes. OFF The screen saver does not start up. 4:3 picture 16:9 picture 4:3 LETTER BOX This mode is used with 4:3 televisions. 4:3 images are displayed normally. 16:9 images are visible at their full width, but there are blank area at the top and bottom of the screen. 4:3 picture 16:9 Use with a 16:9 wide television. 16:9 picture 4:3 picture 16:9 picture < Some wide-screen discs that do not permit the Pan Scan mode playback are automatically played in Letter Box mode. < Depending on the DVD, 4:3 Letter Box may be selected automatically instead of 4:3 Pan Scan and vice versa. < If 16:9 (Wide) is selected and a normal TV is connected, 16:9 content will appear distorted during playback (objects look thin). 37