TEAC DR-H358i Owners Manual - Page 53

Troubleshooting, General, DISC/USB, FM Tuner

Get TEAC DR-H358i PDF manuals and user guides View all TEAC DR-H358i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Troubleshooting (1) If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power. e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan. e Press the STANDBY/ON button to turn the unit on. Remote control does not work. e Press the STANDBY/ON button to turn the unit on. e If the batteries are dead, change the batteries. e Use remote control unit within the range (5 m ) and point at the front panel. e Clear obstacles between the remote control unit and the main unit. e If a strong light is near the unit, turn it off. Severe hum or noise is heard. e Place the unit as far away from a TV as possible. e Make sure the line cords and speaker cables are as far away from the AC supply as possible. DISC/USB Will not play. e Reload the disc with the label side UP. e Use a playable disc (page 16). e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Check the region code of the DVD (page 16). e If the unit is condensed, leave the unit for one or two hours with the power turned on (page 50). PROHIBIT icon "A" appears on the screen. e The operation is not permitted by the disc or the unit. e Note that during playback of a title part (cautions, software maker's logo, etc.), most operations are prohibited by the disc. e If another operation is still in process, wait a moment and try again. Cannot access some setup menu items. e Although it is possible to enter the setup screen while playback is continuing (or in resume mode), not all menu functions will be available. Expand the number of available functions by pressing the Stop button (H) twice (page 36). Scanning stops. e Scanning does not work within menus. Sound skips. e Place the unit on a stable place to avoid vibration and shock. e If the disc is dirty, clean the surface of the disc. e Do not use scratched, damaged or warped discs. There is no sound or only a very low-level sound is heard. e Adjust the volume. e Check the connection to the speakers. e Check the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) (page 38). e The sound is muted during pause, slow-motion, and fast forward/ reverse. Press the Play/Pause button (y/J) to resume normal playback. No digital audio output. e Check that the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) is set to "ALL" or "PCM only" (page 38). Digital audio recording is not possible on another device. e Check that the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) setting is set to "PCM only". e Copy-prohibit material cannot be copied digitally. No picture/distorted picture e Check the connection to the television (monitor) e Check the operating instructions for the television (monitor) to make sure that you have the right input selected, etc. e If you are using a HDMI connection, make sure it is configured correctly (page 40). e When your television/monitor is not compatible with Progressive scan, never set the TV MODE setting to "PROGRESSIVE" (page 39). Picture noise. e If video from this system has to go through your VCR to get to your TV, the copy-protection applied to some DVD programmes could affect picture quality. Please connect the unit directly to your TV. The image is distorted or monochromatic. e Make sure that the PAL-NTSC setting matches the television/ monitor (page 40). e Adjust the aspect ratio to correspond to the television/monitor in use (page 37). The aspect ratio of the screen cannot be changed. e The aspect ratio might be fixed by the disc. Picture and sound do not match up. e With some TV sets there may be a short pause from when the video signal is received until the image appears. If the sound from the speaker does not match the TV image, minimize the volume level of the DR-H358i and output the sound from the TV. FM Tuner Cannot listen to any station, or signal is too weak. e Tune in the station properly. e Rotate the FM or DAB antenna for the best reception position. Though the broadcast is stereo, it sounds monaural. e Press the FM MODE button. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
53
If you have problems with your system, look through this chart and
see if you can solve the problem yourself before calling your dealer or
TEAC service center.
General
No power.
e
Check the connection to the AC power supply. Check and make
sure the AC source is not a switched outlet and that, if it is, the
switch is turned on. Make sure there is power to the AC outlet by
plugging another item such as a lamp or fan.
e
Press the STANDBY/ON button to turn the unit on.
Remote control does not work.
e
Press the STANDBY/ON button to turn the unit on.
e
If the batteries are dead, change the batteries.
e
Use remote control unit within the range (5 m) and point at the
front panel.
e
Clear obstacles between the remote control unit and the main
unit.
e
If a strong light is near the unit, turn it off.
Severe hum or noise is heard.
e
Place the unit as far away from a TV as possible.
e
Make sure the line cords and speaker cables are as far away from
the AC supply as possible.
DISC/USB
Will not play.
e
Reload the disc with the label side UP.
e
Use a playable disc (page 16).
e
If the disc is dirty, clean the surface of the disc.
e
A blank disc has been loaded. Load a prerecorded disc.
e
Check the region code of the DVD (page 16).
e
If the unit is condensed, leave the unit for one or two hours with
the power turned on (page 50).
PROHIBIT icon “
A
” appears on the screen.
e
The operation is not permitted by the disc or the unit.
e
Note that during playback of a title part (cautions, software
maker’s logo, etc.), most operations are prohibited by the disc.
e
If another operation is still in process, wait a moment and try
again.
Cannot access some setup menu items.
e
Although it is possible to enter the setup screen while playback
is continuing (or in resume mode), not all menu functions will be
available. Expand the number of available functions by pressing
the Stop button (
H
) twice (page 36).
Scanning stops.
e
Scanning does not work within menus.
Sound skips.
e
Place the unit on a stable place to avoid vibration and shock.
e
If the disc is dirty, clean the surface of the disc.
e
Do not use scratched, damaged or warped discs.
There is no sound or only a very low-level sound is heard.
e
Adjust the volume.
e
Check the connection to the speakers.
e
Check the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) (page 38).
e
The sound is muted during pause, slow-motion, and fast forward/
reverse. Press the Play/Pause button (
y
/
J
) to resume normal
playback.
No digital audio output.
e
Check that the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) is set to
“ALL” or “PCM only” (page 38).
Digital audio recording is not possible on another device.
e
Check that the DIGITAL AUDIO SETUP (DIGITAL OUTPUT) setting is
set to “PCM only”
.
e
Copy-prohibit material cannot be copied digitally.
No picture/distorted picture
e
Check the connection to the television (monitor)
e
Check the operating instructions for the television (monitor) to
make sure that you have the right input selected, etc.
e
If you are using a HDMI connection, make sure it is configured
correctly (page 40).
e
When your television/monitor is not compatible with Progressive
scan, never set the TV MODE setting to “PROGRESSIVE”
(page 39).
Picture noise.
e
If video from this system has to go through your VCR to get to
your TV, the copy-protection applied to some DVD programmes
could affect picture quality. Please connect the unit directly to
your TV.
The image is distorted or monochromatic.
e
Make sure that the PAL-NTSC setting matches the television/
monitor (page 40).
e
Adjust the aspect ratio to correspond to the television/monitor in
use (page 37).
The aspect ratio of the screen cannot be changed.
e
The aspect ratio might be fixed by the disc.
Picture and sound do not match up.
e
With some TV sets there may be a short pause from when the
video signal is received until the image appears. If the sound from
the speaker does not match the TV image, minimize the volume
level of the DR-H358i and output the sound from the TV.
FM Tuner
Cannot listen to any station, or signal is too weak.
e
Tune in the station properly.
e
Rotate the FM or DAB antenna for the best reception position.
Though the broadcast is stereo, it sounds monaural.
e
Press the FM MODE button.
Troubleshooting (1)