TEAC LP-R400 Owners Manual - Page 17
Listening to a CD, Press the PLAY/PAUSE button
View all TEAC LP-R400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Listening to a CD 1 1 5 ENGLISH 1 Press the CD button. 3 24 4 Press the OPEN/CLOSE button (L) to close the tray. "--" blinks for a few seconds. When no disc is set, "no dISC" appears on the display. 2 Press the OPEN/CLOSE button (L) to open the tray. < It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed. disc type indicator total number of the tracks total play time of the disc 3 Place a disc on the tray with the printed label face up. < Never place more than one disc on the tray. < The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. < The disc type indicator shows the type of disc currently loaded. CD: A commercial pre-recorded CD CD-R: A finalized CD-R CD-RW: A finalized CD-RW NO TOC CD-R: A CD-R which has yet to be finalized NO TOC CD-RW: A CD-RW which has yet to be finalized blank: No disc or unreadable disc 5 Press the PLAY/PAUSE button (y/J) to start playback. Disc playback starts from the first track, and y lights on the display. < If you load the disc, and then press the PLAY/PAUSE button without having first closed the disc tray, the disc tray closes and playback starts. 17